Investigation of the Cutting Performance of Cutting Tools Coated With the Thermo-Reactive Diffusion (TRD) Technique

Basit Öğe Kaydı
dc.contributor.authorErtürk, Şenol
dc.contributor.authorKayabaşı, Oğuz
dc.date.accessioned2020-04-30T23:18:41Z
dc.date.available2020-04-30T23:18:41Z
dc.date.issued2019
dc.departmentDÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.descriptionKayabasi, Oguz/0000-0003-0129-1113; ERTURK, SENOL/0000-0002-1029-9400en_US
dc.descriptionWOS: 000481972100122en_US
dc.description.abstractThe life of cutting tools used in metal cutting operations is limited due to wear. Therefore, increasing wear resistance is of great importance for minimizing economic losses. By using different coating techniques, tools may be coated with harder compounds for enhancing wear resistance. Tool hardness and toughness are also increased through coating. In this study, boron and titanium coatings were applied on round cutting tool surfaces made of AISI D2 and AISI M2 steels by the thermo-reactive diffusion technique. AISI D2 cutting tool surface was coated with boron at 950 degrees C for 1 hour, and AISI M2 cutting tool surface was coated with boron at 1000 degrees C for 1 hour. After boron coating, the surfaces of the samples were coated with titanium at 1050 degrees C for 1 hour. The coated samples were characterized by using SEM, X-ray diffraction, EDS analysis, and micro hardness tests. Machining tests were performed to observe the wear resistance of the samples and the roughness of the machined surface. Machining tests were carried out on DIN 1651 free-cutting steel. Cylindrical turning tests were run at three different cutting speeds, 38, 73, and 138 m/min. and at three different feeding values, 0.08, 0.12, and 0.16 mm/rev. The results showed that the boron-and titanium-coated tools performed 50% better than the just boron-coated tools. In terms of surface roughness, it was determined that there was no significant difference between the coated and uncoated tools. The cutting performance values of our coating method were compared to those of ISCAR brand RCMT(code of the insert used in turning and milling operations in the ISO norm) inserts coated with the PVD and CVD methods, and it was seen in the experimental results that the tool coated with the TRD method performed better.en_US
dc.identifier.doi10.1109/ACCESS.2019.2931976en_US
dc.identifier.endpage106837en_US
dc.identifier.issn2169-3536
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage106823en_US
dc.identifier.urihttps://doi.org/10.1109/ACCESS.2019.2931976
dc.identifier.urihttps://hdl.handle.net/20.500.12684/3472
dc.identifier.volume7en_US
dc.identifier.wosWOS:000481972100122en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherIeee-Inst Electrical Electronics Engineers Incen_US
dc.relation.ispartofIeee Accessen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectBoronen_US
dc.subjectcoatingsen_US
dc.subjectchemicalsen_US
dc.subjectcutting toolsen_US
dc.subjectsurface roughnessen_US
dc.subjecttitaniumen_US
dc.titleInvestigation of the Cutting Performance of Cutting Tools Coated With the Thermo-Reactive Diffusion (TRD) Techniqueen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
3472.pdf
Boyut:
12.51 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu