The manufacture of particleboards using mixture of peanut hull (Arachis hypoqaea L.) and European Black pine (Pinus nigra arnold) wood chips

Basit Öğe Kaydı
dc.contributor.authorGüler, Cengiz
dc.contributor.authorÇöpür, Yalçın
dc.contributor.authorTaşcıoğlu, Cihat
dc.date.accessioned2020-04-30T23:33:56Z
dc.date.available2020-04-30T23:33:56Z
dc.date.issued2008
dc.departmentDÜ, Orman Fakültesi, Orman Endüstrisi Mühendisliği Bölümüen_US
dc.descriptionGuler, Cengiz/0000-0001-8748-6725en_US
dc.descriptionWOS: 000254072200025en_US
dc.descriptionPubMed: 17689074en_US
dc.description.abstractThis research was conducted to investigate the suitability of peanut hull to produce general purpose particleboards. A series of panels were produced using peanut hull and mixture of peanut hull and European Black pine wood chips. Particleboards were manufactured using various hull ratios in the mixture (0%, 25%, 50%, 75% and 100%). Urea formaldehyde adhesive was utilized in board production and boards were produced to target panel's density of 0.7 g/cm(3). Panels were tested for some physical (water absorption and thickness swelling), chemical (holocellulose content, lignin content, alcohol-benzene solubility, 1% NaOH solubility, hot water solubility and cold water solubility) and mechanical (modulus of rupture, modulus of elasticity and internal bond) properties. The main observation was that increase in peanut hull in the mixture resulted in a decrease in mechanical and physical properties of produced panels and panel including 25% hull in the mixture solely met the standard required by TS-EN 312 standard. Conclusively, a valuable renewable natural resource, peanut hull could be utilized in panel production while it has been mixed to the wood chips. (c) 2007 Elsevier Ltd. All rights reserved.en_US
dc.identifier.doi10.1016/j.biortech.2007.06.013en_US
dc.identifier.endpage2897en_US
dc.identifier.issn0960-8524
dc.identifier.issn1873-2976
dc.identifier.issue8en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage2893en_US
dc.identifier.urihttps://doi.org/10.1016/j.biortech.2007.06.013
dc.identifier.urihttps://hdl.handle.net/20.500.12684/5074
dc.identifier.volume99en_US
dc.identifier.wosWOS:000254072200025en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakPubMeden_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofBioresource Technologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectparticleboarden_US
dc.subjectpeanut hullen_US
dc.subjectblack pineen_US
dc.subjectchemical propertiesen_US
dc.subjecttechnological propertiesen_US
dc.titleThe manufacture of particleboards using mixture of peanut hull (Arachis hypoqaea L.) and European Black pine (Pinus nigra arnold) wood chipsen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
5074.pdf
Boyut:
119.63 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
PubMed İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu