INFLUENCE OF SHOULDER DIAMETER ON MECHANICAL RESPONSE AND MICROSTRUCTURE OF FSW WELDED 1050 AL-ALLOY

Basit Öğe Kaydı
dc.contributor.authorUygur, İlyas
dc.date.accessioned2020-04-30T23:18:30Z
dc.date.available2020-04-30T23:18:30Z
dc.date.issued2012
dc.departmentDÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.descriptionWOS: 000303953500006en_US
dc.description.abstractIn this study, commercially pure (CP) aluminum specimens were welded using Friction Stir Welding technique (FSW). Welding process was carried out by rotating 1500 rpm and by moving 200 mm/min. Under constant friction force, four different shoulder diameter (20, 25, 30 and 40 mm) were used. During welding, temperature measurements were performed using non-contact laser thermometer at various parts of the plates from the welding center to outwards. Microscopic and mechanical tests were used to characterize the samples. It has been observed that HAZ limited the dimensions of stirrer shoulders. Hardness values of welding zone were slightly high but they were quite close to the hardness of base metal. Tensile strength of the samples was significantly affected by the shoulder diameter.en_US
dc.description.sponsorshipGazi UniversityGazi Universityen_US
dc.description.sponsorshipThe Author thanks Prof. Dr. Adem Kurt and Assoc. Prof. Dr. Hakan Ates at Gazi University for their great assistance and support. The work described here was carried out in the department of Metal Education.en_US
dc.identifier.doi10.2478/v10172-011-0152-3en_US
dc.identifier.endpage60en_US
dc.identifier.issn1733-3490
dc.identifier.issn2300-1909
dc.identifier.issue1en_US
dc.identifier.scopusqualityQ4en_US
dc.identifier.startpage53en_US
dc.identifier.urihttps://doi.org/10.2478/v10172-011-0152-3
dc.identifier.urihttps://hdl.handle.net/20.500.12684/3368
dc.identifier.volume57en_US
dc.identifier.wosWOS:000303953500006en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherPolska Akad Nauk, Polish Acad Sciences, Inst Metall & Mater Sci Pasen_US
dc.relation.ispartofArchives Of Metallurgy And Materialsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectShoulder diameteren_US
dc.subjectmechanical propertiesen_US
dc.subjectAluminumen_US
dc.subjectFSWen_US
dc.titleINFLUENCE OF SHOULDER DIAMETER ON MECHANICAL RESPONSE AND MICROSTRUCTURE OF FSW WELDED 1050 AL-ALLOYen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
3368.pdf
Boyut:
1.21 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu