INFLUENCE OF SHOULDER DIAMETER ON MECHANICAL RESPONSE AND MICROSTRUCTURE OF FSW WELDED 1050 AL-ALLOY
Yükleniyor...
Dosyalar
Tarih
2012
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Polska Akad Nauk, Polish Acad Sciences, Inst Metall & Mater Sci Pas
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
In this study, commercially pure (CP) aluminum specimens were welded using Friction Stir Welding technique (FSW). Welding process was carried out by rotating 1500 rpm and by moving 200 mm/min. Under constant friction force, four different shoulder diameter (20, 25, 30 and 40 mm) were used. During welding, temperature measurements were performed using non-contact laser thermometer at various parts of the plates from the welding center to outwards. Microscopic and mechanical tests were used to characterize the samples. It has been observed that HAZ limited the dimensions of stirrer shoulders. Hardness values of welding zone were slightly high but they were quite close to the hardness of base metal. Tensile strength of the samples was significantly affected by the shoulder diameter.
Açıklama
WOS: 000303953500006
Anahtar Kelimeler
Shoulder diameter, mechanical properties, Aluminum, FSW
Kaynak
Archives Of Metallurgy And Materials
WoS Q Değeri
Q3
Scopus Q Değeri
Q4
Cilt
57
Sayı
1
