Influences of argon gas shielding on diffusion bonding of Ti-6Al-4V alloy to aluminum

Basit Öğe Kaydı
dc.contributor.authorAkça, Enes
dc.contributor.authorGürsel, Ali
dc.date.accessioned2020-04-30T23:18:31Z
dc.date.available2020-04-30T23:18:31Z
dc.date.issued2017
dc.departmentDÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.descriptionWOS: 000398088500004en_US
dc.description.abstractThis study presents a diffusion bonding process of commercially pure aluminum to Ti-6Al-4V alloy. Prepared samples were exposed to temperature of 560, 600 and 640 degrees C for the bonding time of 30, 45 and 60 min at the atmosphere of argon gas and non-argon. Diffusion bonding is a dissimilar metal welding process which can be applied to the materials without causing any physical deformations. The processed samples were also metallographically prepared, optically examined followed by Vickers microhardness test in order to determine joint strength. Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS) were used in this work to investigate the compositional changes in order to observe the influence of atmosphere shielding in the transition zone. The result of tests and analyses were tried to be compared with the effect of argon shielding. The significant influences have been observed in the argon shielding during diffusion bonding process.en_US
dc.description.sponsorshipIUS-RDC (International University of Sarajevo - Research and Development Center); Gebze Technical University (GTU)Gebze Teknik University; Technological Research Laboratory and Scanning Electron Microscope Laboratory (SEM) of GTUen_US
dc.description.sponsorshipThis study was supported by the IUS-RDC (International University of Sarajevo - Research and Development Center) and Gebze Technical University (GTU), and Technological Research Laboratory and Scanning Electron Microscope Laboratory (SEM) of GTU.en_US
dc.identifier.doi10.3989/revmetalm.088en_US
dc.identifier.issn0034-8570
dc.identifier.issn1988-4222
dc.identifier.issue1en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.urihttps://doi.org/10.3989/revmetalm.088
dc.identifier.urihttps://hdl.handle.net/20.500.12684/3371
dc.identifier.volume53en_US
dc.identifier.wosWOS:000398088500004en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherCenimen_US
dc.relation.ispartofRevista De Metalurgiaen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectArgon gas shieldingen_US
dc.subjectDiffusion bondingen_US
dc.subjectDissimilar metal bondingen_US
dc.subjectSolid-state bondingen_US
dc.subjectTi-6Al-4V alloyen_US
dc.titleInfluences of argon gas shielding on diffusion bonding of Ti-6Al-4V alloy to aluminumen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
3371.pdf
Boyut:
7.73 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu