Arşiv logosu
  • Türkçe
  • English
  • Giriş
    Yeni kullanıcı mısınız? Kayıt için tıklayın. Şifrenizi mi unuttunuz?
Arşiv logosu
  • Koleksiyonlar
  • Sistem İçeriği
  • Analiz
  • Talep/Soru
  • Türkçe
  • English
  • Giriş
    Yeni kullanıcı mısınız? Kayıt için tıklayın. Şifrenizi mi unuttunuz?
  1. Ana Sayfa
  2. Yazara Göre Listele

Yazar "Korkut, Derya Sevim" seçeneğine göre listele

Listeleniyor 1 - 20 / 39
Sayfa Başına Sonuç
Sıralama seçenekleri
  • Yükleniyor...
    Küçük Resim
    Öğe
    5S activities and its application at a sample company
    (Academic Journals, 2009) Korkut, Derya Sevim; Çakıcıer, Nevzat; Erdinler, E. Seda; Ulay, Göksel; Doğan, Ahmet Muhlis
    Total Productive Maintenance (TPM) targets enabling the machine operators to undertake the maintenance activities and therefore to increase the efficiency of the equipments. It struggles with six great losses decreasing the efficiency of the equipment. 5S, which is the pre-step of TPM, is a systematic approach providing the contribution of all personnel in the cleaning regime of the company. The clean and steady environment targeted by 5S has positive impacts on the work safety, quality, efficiency and morale. In this study, 5S system, used for ensuring order and discipline in the companies and ensuring the supervision of both simple and even the smallest details, has been reviewed in full details and they have been taken under the content of the research through selecting the assembly department as pilot department for 5S activities applied at a yacht manufacturing company. It has been targeted to set this as a guide for the directors of the company and the researches working in this field by assessing the results of this study.
  • Küçük Resim Yok
    Öğe
    A research on work motivation of managers of forest products industry in Düzce
    (Isparta University of Applied Sciences, 2018) Gedik, Tarık; Çil, Muhammet; Korkut, Derya Sevim; Kaya, Melek Yükselen; Şimşek, Bircan
    Increasing the performance of employees in businesses is a desired goal, which can be achieved through work motivation. Motivational rewards may diverge for different societes, people or businesses even though there are commonly accepted work motivation factors. This study examines the work motivations of administrative staff of forest products industry in Düzce province. We used Work Motivation Scale developed by Mottaz and validated in various studies. The findings of the study revelaed that intrinsic rewards have greater effect on the work motivation than extrinsic rewards. Effects of the rewards on the work motivation are not significantly different in terms of age, education, marital status, income, position at job and experience.
  • Yükleniyor...
    Küçük Resim
    Öğe
    An analysis of small and medium-sized forest products enterprises in Turkey based on production, capacity usage, machine park and technology
    (Academic Journals, 2010) Korkut, Derya Sevim; Erdem, Emel; Duru, M. Nafiz
    With this work, it is aimed to put forward the present situation about "production, capacity usage, machine park and technology" and to define the problems of the actuations of the forest products industry which is included in the scope of small and medium-sized enterprises (SME) in Duzce (an important place in terms of actuating the forest products industry in Turkey). For this aim, face-to-face questionnaires were administered to 43 SMEs in the forest products industry in Duzce. Data obtained revealed the problems of the SMEs and it was found that the basis of their problems was insufficient finance.
  • Yükleniyor...
    Küçük Resim
    Öğe
    Application of ISO/TS 16949:2009 in Forest Products Industry
    (Kastamonu Univ, 2016) Solak, Ertan; Korkut, Derya Sevim
    The aim of the study is to present the short, medium and long term benefits of the activities in the basis of quality management development and in the context of ISO/TS 16949 Automotive Sub-Industry Quality Management System which determines the service standards of a forest products facility as an automotive sub-industry supplier, to be shown as an example to similar facilities. In this study which aims to present the facility's character an examination has been done via supplier, production and customer parameters and an example profile has been formed. A progress on the activities which are made in accordance with the project plan about improving production parameters such as in-process junk, customer satisfaction, customer return and staff circulation rate has been determined. The dynamics of forest production sector presents a critical factor about sufficiency of the suppliers. This parameter is followed by supplier's performance point and even if expected level is reached the activities about this subject continues according to project plan. Customer satisfaction rate is determined by annual performance points given by customers and the facility reaches the expected level according these parameter data.
  • Yükleniyor...
    Küçük Resim
    Öğe
    Application of preventive maintenance planning in a parquet enterprise
    (Academic Journals, 2009) Korkut, Derya Sevim; Bekar, İlter; Öztekin, Ertuğrul
    In this study, the process of a parquet enterprise's transition to preventive maintenance which has been implementing maintenance technique in case of breakdown was investigated. During that transition process, follow up forms for maintenance-repair, breakdown and spare parts were prepared and the implementation processes were followed. At the end of the implementation, it was identified that breakdowns have declined, anxiety and turmoil brought about by breakdowns have been prevented, the life span of the machines soared, labour-borne accidents declined and production quality increased.
  • Yükleniyor...
    Küçük Resim
    Öğe
    Çalışma Saatlerinin Çalışan Memnuniyeti Üzerine Etkisi
    (2019) Aydın, Caner; Korkut, Derya Sevim
    Bu çalışma ile çalışma saatlerinin çalışan memnuniyeti üzerine etkisinin belirlenmesi amaçlanmıştır. Anketyöntemi veri toplama yöntemi olarak kullanılmıştır. Anket formu Batı Karadeniz Bölgesinde (Düzce, Bolu,Karabük, Kastamonu, Bartın, Zonguldak) mobilya endüstrisinde faaliyet gösteren işletme çalışanlarınauygulanmıştır. Batı Karadeniz Bölgesi işletme sayısı bakımından Türkiye’deki orman ürünleri sanayi sektörünübüyük oranda temsil ettiği için çalışma bu bölgede yapılmıştır. Anketlerden elde edilen veriler SPSS ortamınaaktarılarak, istatistiksel yöntemlerle değerlendirilmiştir. Çalışma sonucunda; katılımcıların %70,5’i tek vardiyalıçalışma sisteminde çalıştıklarını belirtmişlerdir. Katılımcıların haftalık, 2 haftalık ve aylık olarak vardiyadönüşümü yaptıkları ve en verimli vardiyanın tek vardiya sistemi olduğu belirlenmiştir. Ayrıca katılımcıların%38,3’ü çalıştıkları işten memnun olduklarını, %32,4’ü ise çalışma saatlerinden memnun olduklarınıbelirtmişlerdir.
  • Yükleniyor...
    Küçük Resim
    Öğe
    The color changes on varnish layers after accelerated aging through the hot and cold-check test
    (Academic Journals, 2010) Budakçı, Mehmet; Korkut, Derya Sevim; Esen, Raşit
    The purpose of this paper is to determine the color changes of cellulosic, polyurethane and acrylic varnish layers which were applied on the surfaces of Scots pine (Pinus sylvestris L.), Eastern beech (Fagus orientalis L.) and sessile oak (Quercus petraea L.) wood material after accelerated aging effects through the hot and cold-check test. For this purpose, test samples were firstly kept at 50 +/- 5 degrees C temperature for 1 h, and then conditioned for 1 h in a conditioning room, later moved to -20 +/- 2 degrees C temperature keeping for 1 h according to ASTM D1211-97 standard. These processes were accepted as 1 cycle and tests were continued to 20 cycles. Then the color changes were determined by using Minolta CR-231 device of tristimulus colorimeter according to ASTM D2244-07e1 standard. It was found that most color change was determined in cellulosic, polyurethane and acrylic varnish layers on the surfaces of Scots pine (Pinus sylvestris L.), Eastern beech (F. orientalis L.) and sessile oak (Q. petraea L.) wood material. The endurance of the protective coating (such as paint and varnish) to external effects is limited and the lifetime of the coating is determined by the type and the severity of the effects to which it is exposed. The effect of a color change on varnish layers can determine the usefulness of the varnish. It is conjectured that especially for the manufacturers and consumers in the furniture and decoration sector, the data obtained in this study will contribute to the making up of deficiencies in the understanding of the subject.
  • Yükleniyor...
    Küçük Resim
    Öğe
    Düzce İlinde Faaliyet Gösteren Parke Endüstrisinin İncelenmesi
    (Düzce Üniversitesi, 2010) Korkut, Derya Sevim; Akbulut, Süleyman
    Bu çalısmada parke isletmelerinin mevcut durumu, karsılastıkları sorunlar ve gelecekteki hedefleriarastırılmıstır. Arastırma orman ürünleri endüstrisi açısından önemli bir merkez olması nedeniyle Düzce ?likapsamında planlanmıstır. Çalısma öncelikle Düzce ?li’nde parke üretimi yapan isletmelere yöneltilmeküzere bilgi toplama formu hazırlanarak, yüz yüze anket çalısması yöntemiyle uygulanmıstır. Arastırmasonucunda isletmelerin tam kapasite ile çalısamama nedenleri olarak talep yetersizliği (%31) ve piyasakosulları (%31) belirlenmistir. Ayrıca isletmelerin %92’si hammadde temininde, %15’i ise pazar bulmakonusunda sorun yasadıklarını belirtmislerdir.
  • Yükleniyor...
    Küçük Resim
    Öğe
    Düzce Orman Ürünleri Sanayi Çalışanlarında Yorgunluk ve Yorgunluğu Etkileyen Etmenlerin İncelenmesi
    (2021) Gedik, Tarık; Çil, Muhammet; Korkut, Derya Sevim
    İş gücü yoğun bir sektör olan orman ürünleri sanayi sektöründe çalışanlar, çalışma ortamının çevresel ve fiziksel faktörlerinden etkilenmektedirler. Bu çalışmada, Düzce ilinde faaliyette bulunan orman ürünleri sanayi işyerlerinde fiziksel, zihinsel ve çevresel faktörler ile vücut duruşunun çalışanların yorgunluk düzeyleri üzerindeki etkilerinin belirlenmesi amaçlanmıştır. Çalışma amacını gerçekleştirmek için 2019 yılı Düzce Ticaret ve Sanayi Odasına kayıtlı 10 ve daha fazla çalışanı olan 196 işletmede 5459 çalışan, çalışmanın evrenini oluşturmuştur. 2019 ve 2020 yıllarındaki Covid-19 pandemisinin olumsuzlukları nedeniyle %95 güven düzeyi, %6,75 hata oranında 203 çalışana ulaşılabilmiştir. Çalışmada araştırmacılar tarafından geliştirilen anket formu kullanılmıştır. Çalışanların yorgunluk düzeyleri Krupp vd. tarafından geliştirilen “Yorgunluk Şiddet Ölçeği” ile belirlenmiştir. Yapılan istatistiksel değerlendirmeler sonucunda katılımcıların %20,1’inin işten kaynaklı olarak yorgunluk yaşamadıkları, %63,3’ünün işten kaynaklı olarak yorgunluk yaşadıkları ve %16,6’sının da işten kaynaklı olarak kronik yorgunluk yaşadıkları belirlenmiştir. Katılımcıların iş esnasında taşınan ağırlığın fazla olmasından kaynaklı sorunlar yaşadığı ve çalışma ortamında bulunan çevresel faktörlerden en fazla gürültü, toz ve sıcaklık/soğukluktan kaynaklı sorunlar yaşadığı belirlenmiştir.
  • Yükleniyor...
    Küçük Resim
    Öğe
    Effect of heat treatment on some mechanical properties of laminated window profiles manufactured using two types of adhesives
    (Mdpi, 2008) Korkut, Derya Sevim; Korkut, Süleyman; Dilik, Tuncer
    The mechanical properties of laminated window profiles manufactured using two types of adhesives were determined. The objective of this study is to evaluate the effects of heat treatment on some mechanical properties of laminated window profiles that manufactured from Kosipo (Entandrophragma candollei Harms.) using differenet type adhesives. Commercially produced polyurethane based Macroplast UR 7221 and polyvinyl acetate (PVAc) adhesive were used for experiments. The overall test results were found to be comparable to those obtained in the previous studies. Both types of adhesives resulted in significant differences in their strength characteristics at 95% confidence level. Adhesive UR 7221 improved the overall properties of the samples in contrast to PVAc.
  • Yükleniyor...
    Küçük Resim
    Öğe
    Effect of Heat Treatment on Surface Characteristics of Wild Cherry Wood
    (North Carolina State Univ Dept Wood & Paper Sci, 2013) Korkut, Derya Sevim; Hızıroğlu, Salim; Aytin, Ayhan
    Heat treatment effects on surface properties of wild cherry (Prunus avium) including surface roughness, glossiness, and color stability were evaluated. Samples were exposed to a temperature of 212 degrees C for 1.5 and 2.5 h. A stylus type profilometer, glossmeter, and spectrophotometer were employed to determine surface characteristics of heat-treated specimens. Glossiness and surface roughness values of the samples decreased with heat treatment compared to those of control specimens. The glossiness and values of surface roughness decreased for the samples with all treatment combinations. The samples had significant discoloration as a result of heat exposure. Color difference of the specimens increased as a result of all treatment schedules.
  • Yükleniyor...
    Küçük Resim
    Öğe
    Effect of thermal modification on the properties of narrow-leaved ash and chestnut
    (Elsevier, 2012) Korkut, Süleyman; Korkut, Derya Sevim; Kocaefe, Duygu; Elustondo, Diego; Bajraktari, Agron; Çakıcıer, Nevzat
    The concept of thermal modification has evolved from a challenging research program to commercial reality in several European countries in recent years. The aim of this study is to determine the change of various physical properties (oven-dry density, air-dry density, weight loss, swelling and anti-swelling efficiency (ASE)), compression strength parallel to grain, colour difference (Delta E), glossiness and surface roughness of narrow-leaved ash (Fraxinus angustifolia Vahl.) and chestnut (Castanea sativa Mill.) woods after heat treatment under different temperatures and durations. For this study two different temperatures (160 degrees C and 180 degrees C) and two different durations (2h and 4h) were considered. A stylus method was employed to evaluate the surface characteristics of the samples. Roughness measurements by the stylus method were made in the direction perpendicular to the fiber. Four main roughness parameters which are mean arithmetic deviation of profile (RA, mean peak-to-valley height (R-z), root mean square roughness (R-q), and maximum roughness (R-y) obtained from the surface of wood were used to evaluate the effect of heat treatment on the surface characteristics of the specimens. The properties studied were significantly different (p=0.05) at two temperatures and two durations of heat treatment. Based on the findings of this study, the results showed that oven-dry density, air-dry density, swelling, compression strength parallel to grain and surface roughness decreases with increasing heat treatment temperature and time. (C) 2011 Elsevier B.V. All rights reserved.
  • Yükleniyor...
    Küçük Resim
    Öğe
    The effects of heat treatment on physical and technological properties and surface roughness of Camiyani Black Pine (Pinus nigra Arn. subsp pallasiana var. pallasiana) wood
    (Elsevier Sci Ltd, 2008) Gündüz, Gökhan; Korkut, Süleyman; Korkut, Derya Sevim
    Heat treatment is often used to improve the dimensional stability of wood. In this study, the effects of heat treatment on physical properties and surface roughness of Camiyani Black Pine (Pinus nigra Arn. subsp. pallasiana var. pallasiana) wood were examined. Samples obtained from Yenice-Zonguldak Forest Enterprises, Turkey, were subjected to heat treatment at varying temperatures and for varying durations. The physical properties of heat-treated and control samples were tested, and oven-dry density, air-dry density, and swelling properties were determined. The mechanical properties of heat-treated and control samples were tested, and compression strength, and Janka-hardness were determined. A stylus method was employed to evaluate the surface characteristics of the samples. Roughness measurements by the stylus method were made in the direction perpendicular to the fiber. Four main roughness parameters, mean arithmetic deviation of profile (R-a), mean peak-to-valley height (R-z), root mean square roughness (R-q), and maximum roughness (R-y) obtained from the surface of wood were used to evaluate the effect of heat treatment on the surface characteristics of the specimens. Significant difference was determined (p = 0.05) between physical and technological properties, and surface roughness parameters (R-a, R-z, R-y, R-q) for three temperatures and three durations of heat treatment. Based on the findings in this study, the results showed that density, swelling, compression strength, Janka-hardness and surface roughness values decreased with increasing treatment temperature and treatment times. Increase in temperature and duration further diminished technological strength values of the wood specimens. Camiyani Black Pine wood could be utilized by using proper heat treatment techniques without any losses in strength values in areas where working, stability, and surface smoothness, such as in window frames, are important factors. (c) 2007 Elsevier Ltd. All rights reserved.
  • Yükleniyor...
    Küçük Resim
    Öğe
    The effects of heat treatment on physical properties and surface roughness of red-bud maple (Acer trautvetteri Medw.) wood
    (Elsevier Sci Ltd, 2008) Korkut, Derya Sevim; Güller, Bilgin
    Heat treatment is often used to improve the dimensional stability of wood. In this study, the effects of heat treatment on physical properties and surface roughness of red-bud maple (Acer trautvetteri Medw.) wood were examined. Samples obtained from Duzce Forest Enterprises, Turkey, were subjected to heat treatment at varying temperatures and durations. The physical properties of heat-treated samples were compared against controls in order to determine their; oven-dry density, air-dry density, and swelling properties. A stylus method was employed to evaluate the surface characteristics of the samples. Roughness measurements, using the stylus method, were made in the direction perpendicular to the fiber. Three main roughness parameters; mean arithmetic deviation of profile (R-a), mean peak-to-valley height (R-z), and maximum roughness (R-max) obtained from the surface of wood, were used to evaluate the effect of heat treatment on the surface characteristics of the specimens. Significant differences were determined (p > 0.05) between surface roughness parameters (R-a, R-z, R-max) at three different temperatures and three periods of heat treatment. The results showed that the values of density, swelling and surface roughness decreased with increasing temperature treatment and treatment times. Red-bud maple wood could be utilized successfully by applying proper heat treatment techniques without any losses in investigated parameters. This is vital in areas, such as window frames, where working stability and surface smoothness are important factors. (c) 2007 Elsevier Ltd. All rights reserved.
  • Yükleniyor...
    Küçük Resim
    Öğe
    The effects of heat treatment on technological properties in Red-bud maple (Acer trautvetteri Medw.) wood
    (Elsevier Sci Ltd, 2008) Korkut, Süleyman; Kök, M. Şamil; Korkut, Derya Sevim; Gürleyen, Tuğba
    Heat treatment is often used to improve the dimensional stability of wood. In this study, the effects of heat treatment on technological properties of Red-bud maple (Acer trautvetteri Medw.) wood were examined. Samples obtained from Duzce Forest Enterprises, Turkey, were subjected to heat treatment at varying temperatures (120 degrees C, 150 degrees C and 180 degrees C) and for varying durations (2 h, 6 It and 10 h). The technological properties of heat-treated wood samples and control samples were tested. Compression strength parallel to grain, bending strength, modulus of elasticity in bending, janka-hardness, impact bending strength, and tension strength perpendicular to grain were determined. The results showed that technological strength values decreased with increasing treatment temperature and treatment times. Red-bud maple wood could be utilized by using proper heat treatment techniques with minimal losses in strength values in areas where working, and stability such as in window frames, are important factors. (C) 2007 Elsevier Ltd. All rights reserved.
  • Yükleniyor...
    Küçük Resim
    Öğe
    The effects of heat treatment on the physical properties and surface roughness of Turkish Hazel (Corylus colurna L.) wood
    (Mdpi, 2008) Korkut, Derya Sevim; Korkut, Süleyman; Bekar, İlter; Budakçı, Mehmet; Dilik, Tuncer; Çakıcıer, Nevzat
    Heat treatment is often used to improve the dimensional stability of wood. In this study, the effects of heat treatment on the physical properties and surface roughness of Turkish Hazel (Corylus colurna L.) wood were examined. Samples obtained from Kastamonu Forest Enterprises, Turkey, were subjected to heat treatment at varying temperatures and for different durations. The physical properties of heat-treated and control samples were tested, and oven-dry density, air-dry density, and swelling properties were determined. A stylus method was employed to evaluate the surface characteristics of the samples. Roughness measurements, using the stylus method, were made in the direction perpendicular to the fiber. Four main roughness parameters, mean arithmetic deviation of profile (Ra), mean peak-to-valley height (Rz), root mean square roughness (Rq), and maximum roughness (Ry) obtained from the surface of wood were used to evaluate the effect of heat treatment on the surface characteristics of the specimens. Significant difference was determined (p = 0.05) between physical properties and surface roughness parameters (Ra, Rz, Ry, Rq) for three temperatures and three durations of heat treatment. The results showed that the values of density, swelling and surface roughness decreased with increasing temperature treatment and treatment times. Turkish Hazel wood could be utilized successfully by applying proper heat treatment techniques without any losses in investigated parameters. This is vital in areas, such as window frames, where working stability and surface smoothness are important factors.
  • Küçük Resim Yok
    Öğe
    The effects of protective dye layer applied on varnish layer hardness, scratch resistance and glossiness of various blockboard types
    (Academic Journals, 2011) Çakıcıer, Nevzat; Korkut, Süleyman; Korkut, Derya Sevim; Kurtoğlu, Ahmet; Erdinler, E. Seda; Ulay, Göksel
    This study is carried out for determining the changes occurring on the amount of the material used on the protective layer when polyurethane and acrylic (lacquered) dye is applied on the test samples prepared from sandwich type composite (blockboard) boards with their surface coated or uncoated with paper, which are used for the yacht furniture and interior decoration. After applying polyurethane and acrylic dye on the 30 test samples prepared as coated or uncoated with paper with 10 x 10 x 1.6 cm sizes from blockboard, the surface hardness values of the protective layer as applied in ASTM D 436695 (1984) were determined, the scratch resistance were determined according to the essentials specified in TS 4757 (1986), and the glossiness were also determined according to the essentials specified in TS 4318 EN ISO 2813 (2002). According to the result of the study, concealing dyeing is obtained with much surface hardness, scratch resistance and glossiness by using less lacquer dye on the boards coated with paper. With this study, it is possible to suggest that coating with paper before lacquer dyeing can be a preferable application in terms of cost and time saving.
  • Yükleniyor...
    Küçük Resim
    Öğe
    Effects of QUV accelerated aging on surface hardness, surface roughness, glossiness, and color difference for some wood species
    (2011) Çakıcıer, Nevzat; Korkut, Süleyman; Korkut, Derya Sevim; Kurtoğlu, Ahmet; Sönmez, Abdullah
    The surface hardness, surface roughness, glossiness, and color difference were determined for wooden materials produced from three commonly used species - two native of Turkey and one exotic - treated with one- and two-component water-based varnishes and exposed to different amounts of radiation to mimic accelerated aging using a QUV aging device. One- and two-component water-based varnishes were applied two-and three coats to Scoth pine (Pinus sylvestris L.), Iroko (Chlorophora excelsa), and Anatolian chestnut (Castenea sativa Mill.) woods. Then, the varnish coated materials were exposed to QUV aging devices for 216 and 432 h. Results indicated that the surface hardness and glossiness were decreased for all the three wood species across all the treat ment combinations. However, values of surface roughness and color difference were increased for all the threewood species across all the treatment combination. © 2011 Academic Journals.
  • Yükleniyor...
    Küçük Resim
    Öğe
    EVALUATING THE SURFACE ROUGHNESS OF HEAT-TREATED WOOD CUT WITH DIFFERENT CIRCULAR SAWS
    (North Carolina State Univ Dept Wood & Paper Sci, 2011) Budakçı, Mehmet; İlçe, Abdullah Cemil; Korkut, Derya Sevim; Gürleyen, Tuğba
    The effects of different circular saws on surface roughness were determined for heat-treated wood, including Scots pine (Pinus sylvestris L.), eastern beech (Fagus orientalis L.), Uludag fir (Abies bornmulleriana Mattf.), and sessile oak (Quercus petraea L.), which are used commonly in Turkey. Samples were heat-treated for 3, 5, or 7 hours at 140 or 160 C, and cut with circular saws with 28, 48, 60, 72, or 96 teeth. Then, the surface roughness of the samples was determined using a scanning device (TIME TR200) with respect to the ISO 4287 standard. Heat treatment increased the surface roughness of the wood used, and changed the colour of the wood. To obtain smooth surfaces with or without heat treatment, a circular saw with 28 teeth and a double chamfered (WZ) mouth profile is recommended.
  • Yükleniyor...
    Küçük Resim
    Öğe
    Evaluation of Wooden Construction Element Production in Turkey
    (Düzce Üniversitesi, 2016) Karadağ, Aybike Ayfer; Korkut, Derya Sevim; Korkut, Süleyman; Köylü, Pınar; Akıncı Kesim, Güniz
    Wooden construction elements are an indispensable part of open and green spaces. Wood gives different qualities (aesthetics, natural appearance, quality, economy, etc) to the construction elements. Thus, the wooden construction element also affects the character of the space. For this reason, it is very important to use appropriate wood for the construction element. This topic is concerned with the wooden construction element production process. The aim of the work is to determine and to evaluate the current situation of the production of wooden construction elements and to propose the development of the industry in Turkey. Various problems have been identified from wood material selection, to raw material procurement, to technical specifications in products and to the marketing process in the context of the results. Suggestions have been developed for solving for the problems.
  • «
  • 1 (current)
  • 2
  • »

| Düzce Üniversitesi | Kütüphane | Açık Erişim Politikası | Rehber | OAI-PMH |

Bu site Creative Commons Alıntı-Gayri Ticari-Türetilemez 4.0 Uluslararası Lisansı ile korunmaktadır.


Düzce Üniversitesi, Kütüphane ve Dokümantasyon Daire Başkanlığı, Düzce, TÜRKİYE
İçerikte herhangi bir hata görürseniz lütfen bize bildirin

DSpace 7.6.1, Powered by İdeal DSpace

DSpace yazılımı telif hakkı © 2002-2025 LYRASIS

  • Çerez Ayarları
  • Gizlilik Politikası
  • Son Kullanıcı Sözleşmesi
  • Geri Bildirim