Investigation of tribological properties of industrial products with different patterns produced by 3D printing using polylactic acid

Basit Öğe Kaydı
dc.contributor.authorToktas, Ihsan
dc.contributor.authorAkincioglu, Sitki
dc.date.accessioned2025-10-11T20:48:16Z
dc.date.available2025-10-11T20:48:16Z
dc.date.issued2025
dc.departmentDüzce Üniversitesien_US
dc.description.abstractPurposeWith the development of technology, the production of industrial products with 3D (3-Dimensional) printing has become widespread. Variables in production methods affect the durability of products. For this reason, studies to increase the durability of products are gaining importance. This paper aims to examine the tribological behavior of products produced in different patterns using 3D printing methods.Design/methodology/approachFriction wear tests of polylactic acid (PLA) samples produced in different patterns were carried out on a pin-on disc testing device. Friction wear tests were performed according to ASTM G-99 standard. Friction coefficient, weight loss and wear surface images were evaluated.FindingsAccording to the results obtained, it was determined that pattern differences affected the tribological properties of the samples. The lowest coefficient of friction was observed in PLA1, while the highest wear resistance was found in PLA3.Originality/valueStudies on the tribological properties of samples produced with a 3D printer are limited. In this study, the effect of samples with a 50% filling rate and different patterns on tribological properties was investigated. It was desired to determine the effect of different patterns on wear characteristics.en_US
dc.identifier.doi10.1108/RPJ-05-2024-0232
dc.identifier.endpage378en_US
dc.identifier.issn1355-2546
dc.identifier.issn1758-7670
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-85207219651en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage371en_US
dc.identifier.urihttps://doi.org/10.1108/RPJ-05-2024-0232
dc.identifier.urihttps://hdl.handle.net/20.500.12684/21836
dc.identifier.volume31en_US
dc.identifier.wosWOS:001333255600001en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherEmerald Group Publishing Ltden_US
dc.relation.ispartofRapid Prototyping Journalen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.snmzKA_WOS_20250911
dc.subjectPolylactic acid (PLA)en_US
dc.subjectIndustrial productsen_US
dc.subjectTribologyen_US
dc.subject3D printingen_US
dc.subjectFriction coefficienten_US
dc.titleInvestigation of tribological properties of industrial products with different patterns produced by 3D printing using polylactic aciden_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu