Investigation of tribological properties of industrial products with different patterns produced by 3D printing using polylactic acid
Küçük Resim Yok
Tarih
2025
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Emerald Group Publishing Ltd
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
PurposeWith the development of technology, the production of industrial products with 3D (3-Dimensional) printing has become widespread. Variables in production methods affect the durability of products. For this reason, studies to increase the durability of products are gaining importance. This paper aims to examine the tribological behavior of products produced in different patterns using 3D printing methods.Design/methodology/approachFriction wear tests of polylactic acid (PLA) samples produced in different patterns were carried out on a pin-on disc testing device. Friction wear tests were performed according to ASTM G-99 standard. Friction coefficient, weight loss and wear surface images were evaluated.FindingsAccording to the results obtained, it was determined that pattern differences affected the tribological properties of the samples. The lowest coefficient of friction was observed in PLA1, while the highest wear resistance was found in PLA3.Originality/valueStudies on the tribological properties of samples produced with a 3D printer are limited. In this study, the effect of samples with a 50% filling rate and different patterns on tribological properties was investigated. It was desired to determine the effect of different patterns on wear characteristics.
Açıklama
Anahtar Kelimeler
Polylactic acid (PLA), Industrial products, Tribology, 3D printing, Friction coefficient
Kaynak
Rapid Prototyping Journal
WoS Q Değeri
Q1
Scopus Q Değeri
Q1
Cilt
31
Sayı
2
