Application of Deep Cryogenic Treatment to Uncoated Tungsten Carbide Inserts in the Turning of AISI 304 Stainless Steel

Basit Öğe Kaydı
dc.contributor.authorÖzbek, Nurse Altan
dc.contributor.authorÇiçek, Adem
dc.contributor.authorGülesin, Mahmut
dc.contributor.authorÖzbek, Onur
dc.date.accessioned2020-04-30T22:39:33Z
dc.date.available2020-04-30T22:39:33Z
dc.date.issued2016
dc.departmentDÜ, Cumayeri Meslek Yüksekokuluen_US
dc.descriptionOzbek, Orhan/0000-0002-7388-0542; OZBEK, Onur/0000-0002-8372-3487; Altan Ozbek, Nursel/0000-0003-3241-9423en_US
dc.descriptionWOS: 000387856000065en_US
dc.description.abstractThis study investigated the effects of deep cryogenic treatment (DCT) on the wear performance of uncoated tungsten carbide inserts. AISI 304 austenitic stainless steel, widely used in industry, was selected as the workpiece material. Cutting experiments showed that the amount of wear significantly increased with increasing cutting speed. In addition, it was found that DCT contributed to the wear resistance of the turning inserts. The treated turning inserts were less worn by 48 and 38 pct in terms of crater wear and notch wear, respectively, whereas they exhibited up to 18 pct superior wear performance in terms of flank wear. This was attributed to the precipitation of new and finer eta-carbides and their homogeneous distribution in the microstructure of the tungsten carbide material after deep cryogenic treatment. Analyses via image processing, hardness measurements, and SEM observations confirmed these findings.en_US
dc.description.sponsorshipGazi University Scientific Research Project DivisionGazi University [07/2010-23]en_US
dc.description.sponsorshipThe authors wish to place their sincere thanks to Gazi University Scientific Research Project Division for the financial support for the Project No. 07/2010-23.en_US
dc.identifier.doi10.1007/s11661-016-3767-1en_US
dc.identifier.endpage6280en_US
dc.identifier.issn1073-5623
dc.identifier.issn1543-1940
dc.identifier.issue12en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage6270en_US
dc.identifier.urihttps://doi.org/10.1007/s11661-016-3767-1
dc.identifier.urihttps://hdl.handle.net/20.500.12684/2758
dc.identifier.volume47Aen_US
dc.identifier.wosWOS:000387856000065en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringeren_US
dc.relation.ispartofMetallurgical And Materials Transactions A-Physical Metallurgy And Materials Scienceen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.titleApplication of Deep Cryogenic Treatment to Uncoated Tungsten Carbide Inserts in the Turning of AISI 304 Stainless Steelen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
2758.pdf
Boyut:
3.66 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu