THE DENSITY, COMPRESSION STRENGTH AND SURFACE HARDNESS OF HEAT TREATED HORNBEAM (Carpinus betulus) WOOD

Basit Öğe Kaydı
dc.contributor.authorGündüz, Gökhan
dc.contributor.authorKorkut, Süleyman
dc.contributor.authorAydemir, Deniz
dc.contributor.authorBekar, İlter
dc.date.accessioned2020-04-30T23:32:45Z
dc.date.available2020-04-30T23:32:45Z
dc.date.issued2009
dc.departmentDÜ, Orman Fakültesi, Orman Endüstrisi Mühendisliği Bölümüen_US
dc.descriptionKorkut, Suleyman/0000-0002-4871-354X; Aydemir, Deniz/0000-0002-7484-2126; Gunduz, Gokhan/0000-0002-2602-2211en_US
dc.descriptionWOS: 000267094800005en_US
dc.description.abstractThe heat treatment of wood is an environment-friendly method for wood preservation. The heat treatment process only uses steam and heat, and no chemicals or agents are applied to the material during the process. Tests have shown no harmful emissions are apparent when working with the material. This process improves wood's resistance to decay and its dimensional stability. In this study, the density, compression strength and hardness of heat treated hornbeam (Carpinus hetzdus L.) wood were investigated. Wood specimens that had been conditioned at 65% rela degrees C for 4, 8, and 12 hrs. After heat treatment, compression strength and hardness were determined according to TS 2595 and TS 2479. The results showed that the decreases of compression strength and hardness were related to the extent of density loss. Both compression strength and hardness decreased with the increasing temperatures and durations of the heat treatment. While the maximum density loss observed was 16.12% at 210 degrees C and 12 hour, at these heat-treatment conditions, the compression strength approximately decreased 30% and hardness values in tangential, radial, and longitudinal directions approximately decreased by 55%, 54%, and 38%, respectively. Hence, it was concluded that there might be a relationship between changes of these wood properties.en_US
dc.identifier.doi10.4067/S0718-221X2009000100005en_US
dc.identifier.endpage70en_US
dc.identifier.issn0718-221X
dc.identifier.issue1en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage61en_US
dc.identifier.urihttps://doi.org/10.4067/S0718-221X2009000100005
dc.identifier.urihttps://hdl.handle.net/20.500.12684/4808
dc.identifier.volume11en_US
dc.identifier.wosWOS:000267094800005en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherUniv Bio-Bioen_US
dc.relation.ispartofMaderas-Ciencia Y Tecnologiaen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectHeat treatmenten_US
dc.subjectdensityen_US
dc.subjectcompressive strengthen_US
dc.subjecthardnessen_US
dc.subjecthornbeam wooden_US
dc.subjectCarpinus betulus Len_US
dc.titleTHE DENSITY, COMPRESSION STRENGTH AND SURFACE HARDNESS OF HEAT TREATED HORNBEAM (Carpinus betulus) WOODen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
4808.pdf
Boyut:
500.16 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu