The effect of friction stir welding parameters on microstructure and fatigue strength of CuZn37 brass alloys

Basit Öğe Kaydı
dc.contributor.authorÖzer, Alpay
dc.contributor.authorŞık, Aydın
dc.contributor.authorÇevik, B.
dc.contributor.authorÖzer, Melika
dc.date.accessioned2020-04-30T23:32:57Z
dc.date.available2020-04-30T23:32:57Z
dc.date.issued2017
dc.departmentDÜ, Gümüşova Meslek Yüksekokulu, Makine ve Metal Teknolojileri Bölümüen_US
dc.descriptionSik, Aydin/0000-0002-8977-9094en_US
dc.descriptionWOS: 000400952500005en_US
dc.description.abstractIn this study, CuZn37 plates were joined by using friction stir welding. Welding was performed at a rotational speed of 750 rpm and a welding speed of 20 mm min(-1), and at a rotational speed of 1000 rpm and welding speeds of 20, 40, 60 mm min(-1). The welded samples were analyzed at the macro-microstructural level. Moreover, both hardness and fatigue tests were performed on samples. At the end of the macrostructural examination of the samples welded at the rotational speed of 1000 rpm and the welding speed of 20 mm min(-1), the formation of tunnel defects was observed. While the best fatigue life results at low strain rates were obtained in the samples joined at the rotational speed of 750 rpm and the welding speed of 20 nun min(-1), those at high strain rates were obtained in the samples joined at the rotational speed of 1000 rpm and the welding speed of 60 mm min(-1).en_US
dc.identifier.doi10.4149/km_2017_2_107en_US
dc.identifier.endpage114en_US
dc.identifier.issn0023-432X
dc.identifier.issn1338-4252
dc.identifier.issue2en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage107en_US
dc.identifier.urihttps://doi.org/10.4149/km_2017_2_107
dc.identifier.urihttps://hdl.handle.net/20.500.12684/4860
dc.identifier.volume55en_US
dc.identifier.wosWOS:000400952500005en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherRedakcia Kovove Materialyen_US
dc.relation.ispartofKovove Materialy-Metallic Materialsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectfriction stir weldingen_US
dc.subjectfatigue testen_US
dc.subjectbrassen_US
dc.subjectmicrostructureen_US
dc.titleThe effect of friction stir welding parameters on microstructure and fatigue strength of CuZn37 brass alloysen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
4860.pdf
Boyut:
1.63 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu