SOME PHYSICAL AND MECHANICAL PROPERTIES OF PARTICLE BOARDS PRODUCED FROM INDUSTRIAL WOOD CHIPS AND SCOTS PINE (Pines sylvestris) CONES

Basit Öğe Kaydı
dc.contributor.authorKarahan, Selim
dc.contributor.authorGuler, Cengiz
dc.date.accessioned2025-10-11T20:47:58Z
dc.date.available2025-10-11T20:47:58Z
dc.date.issued2025
dc.departmentDüzce Üniversitesien_US
dc.description.abstractThis study investigated the potential use of Scots pine cones as an alternative raw material to larch wood chips for particle board production. Due to the increasing scarcity of forest resources, exploring alternative raw material for the forest industry has gained importance in in recent years. Particle boards were produced in laboratory conditions by blending industrial wood chips with Scots pine cones in varying proportions (25 %, 50 %, 75 % and 100 %) and usingr urea formaldehyde glue. The adhesice mixture contained 55 % urea formaldehyde glue and 33 % ammonium chloride as a hardener. Te production parameters included a press temperature of 150 degrees C, a press time was 7 minutes, and a press pressure of 2,4 MPa to 2,6 MPa. The resulting boards had a thickness of 16 mm and a density ranging from 730 kg/m3 to 740 kg/m3. Tests for thickness iswelling, water absorption, , bending strength, modulus of elasticity and tensile strength perpendicular to the surface were conducted. Results showed that the physical and mechanical properties of the boards containing up to 25 % Scots pine cone met the required standards.en_US
dc.identifier.doi10.22320/s0718221x/2025.14
dc.identifier.issn0717-3644
dc.identifier.issn0718-221X
dc.identifier.scopus2-s2.0-105005708158en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.urihttps://doi.org/10.22320/s0718221x/2025.14
dc.identifier.urihttps://hdl.handle.net/20.500.12684/21648
dc.identifier.volume27en_US
dc.identifier.wosWOS:001476620700002en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherUniv Bio-Bioen_US
dc.relation.ispartofMaderas-Ciencia Y Tecnologiaen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.snmzKA_WOS_20250911
dc.subjectLarch chipen_US
dc.subjectmechanical propertiesen_US
dc.subjectparticle boarden_US
dc.subjectphysical propertiesen_US
dc.subjectpinus sylvestrisen_US
dc.subjectraw materialen_US
dc.subjectscots pine coneen_US
dc.subjectwood chipsen_US
dc.titleSOME PHYSICAL AND MECHANICAL PROPERTIES OF PARTICLE BOARDS PRODUCED FROM INDUSTRIAL WOOD CHIPS AND SCOTS PINE (Pines sylvestris) CONESen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu