DETERMINATION OF THE CUTTING-TOOL PERFORMANCE OF HIGH-ALLOYED WHITE CAST IRON (Ni-Hard 4) USING THE TAGUCHI METHOD

Basit Öğe Kaydı
dc.contributor.authorKır, Durmuş
dc.contributor.authorÖktem, Hasan
dc.contributor.authorÇöl, Mustafa
dc.contributor.authorKoç, Funda Gül
dc.contributor.authorErzincanlı, Fehmi
dc.date.accessioned2020-05-01T09:11:22Z
dc.date.available2020-05-01T09:11:22Z
dc.date.issued2016
dc.departmentDÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.descriptionKoc, Funda Gul/0000-0001-6517-1239;en_US
dc.descriptionWOS: 000375628600012en_US
dc.description.abstractHigh-alloyed white-cast-iron materials are commonly used in the manufacturing industry due to their high wear resistance. The aim of this research is to determine the cutting tool and the optimum cutting conditions required for the metal cutting of these materials. In this study, it is proposed to determine the wear and the tool life utilizing the Taguchi optimization method when hard turning the Ni-Hard 4 material, the alloyed cast iron, with cutting tools produced with powder metallurgy (PM) and to improve the performance of the cutting tools. A series of 18 experiments were conducted on a CNC turning machine, using the cutting process parameters such as the cutting speed, the feed and the depth of cut, based on the Taguchi L-9 orthogonal design of experiments. Uncoated cutting tools were utilized to perform these experiments. PM cutting tools with WC grain sizes of 0.8 mu m and 1.25 mu m were selected for the hard-turning experiments. The flank wear of the cutting tools was examined with SEM. Then, the life of each cutting tool was identified based on the cutting length. The performance of the cutting tools in terms of the wear and the tool life was determined with the Taguchi method based on the obtained data. The results of this study contributed to the hard turning of the Ni-Hard 4 material that is mostly employed in the as-cast condition in the manufacturing industry due to its high hardness. The optimum cutting conditions were determined by means of the Taguchi method.en_US
dc.description.sponsorshipScientific Research Project Unit of the Kocaeli University [KOU-BAP-2012/72]en_US
dc.description.sponsorshipThe authors would like to thank Ugur Yucel at the University of Kocaeli and ARMEKSAN, Machine Part Industry Corporation. This study was supported by the Scientific Research Project Unit of the Kocaeli University (KOU-BAP-2012/72).en_US
dc.identifier.doi10.17222/mit.2014.270en_US
dc.identifier.endpage246en_US
dc.identifier.issn1580-2949
dc.identifier.issn1580-3414
dc.identifier.issue2en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage239en_US
dc.identifier.urihttps://doi.org/10.17222/mit.2014.270
dc.identifier.urihttps://hdl.handle.net/20.500.12684/5536
dc.identifier.volume50en_US
dc.identifier.wosWOS:000375628600012en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherInst Za Kovinske Materiale I In Tehnologieen_US
dc.relation.ispartofMateriali In Tehnologijeen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjecthard turningen_US
dc.subjectcutting toolsen_US
dc.subjectwearen_US
dc.subjectTaguchi methoden_US
dc.titleDETERMINATION OF THE CUTTING-TOOL PERFORMANCE OF HIGH-ALLOYED WHITE CAST IRON (Ni-Hard 4) USING THE TAGUCHI METHODen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
5536.pdf
Boyut:
1.4 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu