Determination of the Surface Roughness of Heat-Treated Wood Materials Planed by the Cutters of a Horizontal Milling Machine

Basit Öğe Kaydı
dc.contributor.authorBudakçı, Mehmet
dc.contributor.authorİlçe, Abdullah Cemil
dc.contributor.authorGürleyen, Tuğba
dc.contributor.authorUtar, Mustafa
dc.date.accessioned2020-05-01T09:11:22Z
dc.date.available2020-05-01T09:11:22Z
dc.date.issued2013
dc.departmentDÜ, Teknoloji Fakültesi, Ağaç İşleri Endüstri Mühendisliği Bölümüen_US
dc.descriptionWOS: 000323370400003en_US
dc.description.abstractThe aim of the present study was to determine the surface roughness of heat-treated Scots pine (Pinus sylvestris L.), Eastern beech (Fagus orientalis L.), Uludag fir (Abies bornmulleriana Mattf.), and sessile oak (Quercus petraea L.) wood material samples following planing by the cutters of a horizontal milling machine. The samples that were heat-treated at 140 degrees C or 160 degrees C for 3, 5, or 7 hours were then processed by star blades or razor blades, which are the most frequently used blade types in a milling machine. The surface roughness of the samples was determined by a touch (spined) scan device (TIME TR200), as indicated by the ISO 4287 principle. The results of the study indicate that heat treatment decreases the surface roughness value of the wood material and a significant difference in surface roughness cannot be detected between planing using the razor blade or the star blade.en_US
dc.description.sponsorshipDuzce UniversityDuzce University [BAP-2009.03.01.024]en_US
dc.description.sponsorshipThe authors are grateful for the support of the Research Fund of Duzce University, Grant. No. BAP-2009.03.01.024.en_US
dc.identifier.endpage3199en_US
dc.identifier.issn1930-2126
dc.identifier.issue3en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage3189en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12684/5543
dc.identifier.volume8en_US
dc.identifier.wosWOS:000323370400003en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherNorth Carolina State Univ Dept Wood & Paper Scien_US
dc.relation.ispartofBioresourcesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectWood materialen_US
dc.subjectHeat treatmenten_US
dc.subjectCriteria of cutting theoryen_US
dc.subjectSurface roughnessen_US
dc.subjectCutters of milling machineen_US
dc.titleDetermination of the Surface Roughness of Heat-Treated Wood Materials Planed by the Cutters of a Horizontal Milling Machineen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
5543.pdf
Boyut:
496.85 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu