Determination of the Surface Roughness of Heat-Treated Wood Materials Planed by the Cutters of a Horizontal Milling Machine
Yükleniyor...
Dosyalar
Tarih
2013
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
North Carolina State Univ Dept Wood & Paper Sci
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
The aim of the present study was to determine the surface roughness of heat-treated Scots pine (Pinus sylvestris L.), Eastern beech (Fagus orientalis L.), Uludag fir (Abies bornmulleriana Mattf.), and sessile oak (Quercus petraea L.) wood material samples following planing by the cutters of a horizontal milling machine. The samples that were heat-treated at 140 degrees C or 160 degrees C for 3, 5, or 7 hours were then processed by star blades or razor blades, which are the most frequently used blade types in a milling machine. The surface roughness of the samples was determined by a touch (spined) scan device (TIME TR200), as indicated by the ISO 4287 principle. The results of the study indicate that heat treatment decreases the surface roughness value of the wood material and a significant difference in surface roughness cannot be detected between planing using the razor blade or the star blade.
Açıklama
WOS: 000323370400003
Anahtar Kelimeler
Wood material, Heat treatment, Criteria of cutting theory, Surface roughness, Cutters of milling machine
Kaynak
Bioresources
WoS Q Değeri
Q1
Scopus Q Değeri
Q3
Cilt
8
Sayı
3
