Experimental optimization of dry sliding wear behavior of in situ AlB2/Al composite based on Taguchi's method

Basit Öğe Kaydı
dc.contributor.authorKöksal, Sakıp
dc.contributor.authorFıçıcı, Ferit
dc.contributor.authorKayıkçı, Ramazan
dc.contributor.authorSavaş, Ömer
dc.date.accessioned2020-05-01T12:10:01Z
dc.date.available2020-05-01T12:10:01Z
dc.date.issued2012
dc.departmentDÜ, Gümüşova Meslek Yüksekokuluen_US
dc.descriptionSAVAS, Omer/0000-0001-7454-1457en_US
dc.descriptionWOS: 000308077400017en_US
dc.description.abstractA wear rate prediction model for aluminum based composites reinforced with 10 and 30 wt.% in situ aluminum diboride (AlB2) flakes was developed using Taguchi's method by considering the parameters of sliding velocity, normal load, sliding distance and reinforcement ratio. Having produced the in situ reinforced bulk of composite, the final shape of the test samples was given through squeeze casting method. The wear behavior of the specimen was investigated using pin-on-disk rig where the samples sliding against a steel disk under different conditions. The orthogonal array, signal-to-noise ratio (S/N) and analysis of variance (ANOVA) were employed to study the optimal testing parameters on composite samples. The experimental results demonstrate that the normal load and reinforcement ratio were the major parameters influencing the specific wear rate for all samples, followed by sliding velocity. The sliding distance, however, was found to have a negligible effect on the specific wear rate. Moreover, the optimal combination of the testing parameters has been predicted. The predicted specific wear rates for all the test samples were found to lie close to that of the experimentally observed ones. (c) 2012 Elsevier Ltd. All rights reserved.en_US
dc.description.sponsorshipTUBITAK (The Scientific and Technological Research Council of Turkey)Turkiye Bilimsel ve Teknolojik Arastirma Kurumu (TUBITAK) [107M023]en_US
dc.description.sponsorshipThe authors would like to thank TUBITAK (The Scientific and Technological Research Council of Turkey) for financial support through Project Number: 107M023.en_US
dc.identifier.doi10.1016/j.matdes.2012.05.048en_US
dc.identifier.endpage130en_US
dc.identifier.issn0264-1275
dc.identifier.issn1873-4197
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage124en_US
dc.identifier.urihttps://doi.org/10.1016/j.matdes.2012.05.048
dc.identifier.urihttps://hdl.handle.net/20.500.12684/5918
dc.identifier.volume42en_US
dc.identifier.wosWOS:000308077400017en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofMaterials & Designen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.titleExperimental optimization of dry sliding wear behavior of in situ AlB2/Al composite based on Taguchi's methoden_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
5918.pdf
Boyut:
681.17 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu