Potential Use of Waste Marble Powder as Adhesive Filler in the Manufacture of Laminated Veneer Lumber

Basit Öğe Kaydı
dc.contributor.authorÖzkaya, Kadir
dc.contributor.authorAyrılmış, Nadir
dc.contributor.authorÖzdemir, Serkan
dc.date.accessioned2020-04-30T23:21:12Z
dc.date.available2020-04-30T23:21:12Z
dc.date.issued2015
dc.departmentDÜ, Teknik Eğitim Fakültesi, Mobilya ve Dekorasyon Eğitimi Bölümüen_US
dc.descriptionAyrilmis, Nadir/0000-0002-9991-4800; Ozdemir, Serkan/0000-0002-0421-0430en_US
dc.descriptionWOS: 000351941000135en_US
dc.description.abstractThe waste powder produced during the manufacture of marble, which is presently mostly discarded in landfills, has the potential for higher-valued usage. Recycling marble waste powder will contribute to the protection of nature as well as economic gain. The potential use of waste marble powder as filler in the adhesive for manufacturing of laminated veneer lumber (LVL) was investigated in this study. With this objective, LVL panels were manufactured by adding marble factory waste powder in different ratios to polyvinyl acetate (PVAc) and urea-formaldehyde (UF) adhesives. The waste powders of beige marbles and travertine marbles were mixed by weight with adhesives in the percentage levels of 0%, 10%, 20%, 30%, 40%, and 50%. Physical and mechanical tests were performed on the specimens obtained from the LVL panels. According to the results obtained from the present study, as compared to the control specimens, higher mechanical performance was obtained with the waste beige marble powder at high contents and with the waste travertine marble powder at low contents with the PVA adhesive. A poorer mechanical performance was found in the travertine powder with the UF adhesive. The dimensional stability of LVLs containing travertine powder was better than that of the LVLs containing beige marble powder.en_US
dc.identifier.endpage1695en_US
dc.identifier.issn1930-2126
dc.identifier.issue1en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage1686en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12684/4154
dc.identifier.volume10en_US
dc.identifier.wosWOS:000351941000135en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherNorth Carolina State Univ Dept Wood & Paper Scien_US
dc.relation.ispartofBioresourcesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectAdhesiveen_US
dc.subjectFilleren_US
dc.subjectLaminated veneer lumber (LVL)en_US
dc.subjectWaste marble dusten_US
dc.titlePotential Use of Waste Marble Powder as Adhesive Filler in the Manufacture of Laminated Veneer Lumberen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
4154.pdf
Boyut:
392.79 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu