Design of grippers for laparoscopic surgery and optimization of experimental parameters for maximum tissue weight holding capacity
Yükleniyor...
Dosyalar
Tarih
2019
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Polska Akad Nauk, Polish Acad Sci, Div Iv Technical Sciences Pas
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
Grippers are routinely used to hold, lift and move organs in laparoscopic operations. They are generally toothed to prevent organs from slipping during retention. Organs held by grippers are always at risk of being damaged by the clamping force. In this study, noncontact grippers working with the Bernoulli principle and using air pressure were developed, and vacuum performance was compared in terms of maximum tissue weight holding capacity. For this purpose, Taguchi method was employed for experimental design and optimization, and Taguchi L-16 orthogonal array was selected for experimental design. The experimental parameters were 4 gripper types, 4 air-pressure levels (3.5, 4.5, 5, and 5.5 bar), 4 flow rates (2.2, 2.6, 2.8 and 3 m(3)/h) and two animal tissue types (ventriculus/gizzard and skin). Values from the experimental procedures were evaluated using signal-to-noise ratio, analysis of variance and three-dimension graphs. An equation was obtained by using 3rd-order polynomial regression model for weight values. Optimization reliability was tested by validation tests and the revealed test results were within the estimated confidence interval. The results obtained from this study are important for future studies in terms of organ injury prevention due to traditional grippers in laparoscopic surgery.
Açıklama
WOS: 000506187000014
Anahtar Kelimeler
Laparoscopic gripper, noncontact gripper, tissue type, Taguchi method, optimization
Kaynak
Bulletin Of The Polish Academy Of Sciences-Technical Sciences
WoS Q Değeri
Q3
Scopus Q Değeri
Q3
Cilt
67
Sayı
6
