Experimental and Statistical Investigation of the Machinability of Al-10% SiC MMC Produced by Hot Pressing Method

Basit Öğe Kaydı
dc.contributor.authorEkici, Ergün
dc.contributor.authorSamtaş, Gürcan
dc.contributor.authorGülesin, Mahmut
dc.date.accessioned2020-05-01T12:14:14Z
dc.date.available2020-05-01T12:14:14Z
dc.date.issued2014
dc.departmentDÜ, Mühendislik Fakültesi, Mekatronik Mühendisliği Bölümüen_US
dc.descriptionWOS: 000335757000074en_US
dc.description.abstractIn this study, during the machining of metal matrix composites produced by a hot pressing method in CNC milling, the effects of cutting parameters and coating type on the surface roughness were experimentally and statistically investigated. The production of composite samples was accomplished by hot pressing, in which Al was used as the matrix element and 10 % SiC particles were chosen for the reinforcing phase. In the machining of samples, three different cutting tools (uncoated, multi-layered and Nano TiAlN coated), three different cutting speeds (60, 78, 101 m/min) and three different feed rates (0.04, 0.08 and 0.12 mm/rev) were employed. Full factorial (3(3)) experimental design was chosen for the statistical investigation of the cutting parameters and parameter interactions. The response surface method was used in the mathematical modelling of the surface roughness obtained from the experiments and in the optimisation of cutting parameters. At the end of the study, the cutting tool's wear was evaluated and the wear was discussed by comparison with similar studies.en_US
dc.identifier.doi10.1007/s13369-014-0951-8en_US
dc.identifier.endpage3298en_US
dc.identifier.issn1319-8025
dc.identifier.issn2191-4281
dc.identifier.issue4en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage3289en_US
dc.identifier.urihttps://doi.org/10.1007/s13369-014-0951-8
dc.identifier.urihttps://hdl.handle.net/20.500.12684/6358
dc.identifier.volume39en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer Heidelbergen_US
dc.relation.ispartofArabian Journal For Science And Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMetal matrix compositeen_US
dc.subjectCNC millingen_US
dc.subjectSurface roughnessen_US
dc.subjectResponse surface methodologyen_US
dc.titleExperimental and Statistical Investigation of the Machinability of Al-10% SiC MMC Produced by Hot Pressing Methoden_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
6358.pdf
Boyut:
2.65 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu