Experimental and Statistical Investigation of the Machinability of Al-10% SiC MMC Produced by Hot Pressing Method
Yükleniyor...
Dosyalar
Tarih
2014
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Springer Heidelberg
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In this study, during the machining of metal matrix composites produced by a hot pressing method in CNC milling, the effects of cutting parameters and coating type on the surface roughness were experimentally and statistically investigated. The production of composite samples was accomplished by hot pressing, in which Al was used as the matrix element and 10 % SiC particles were chosen for the reinforcing phase. In the machining of samples, three different cutting tools (uncoated, multi-layered and Nano TiAlN coated), three different cutting speeds (60, 78, 101 m/min) and three different feed rates (0.04, 0.08 and 0.12 mm/rev) were employed. Full factorial (3(3)) experimental design was chosen for the statistical investigation of the cutting parameters and parameter interactions. The response surface method was used in the mathematical modelling of the surface roughness obtained from the experiments and in the optimisation of cutting parameters. At the end of the study, the cutting tool's wear was evaluated and the wear was discussed by comparison with similar studies.
Açıklama
WOS: 000335757000074
Anahtar Kelimeler
Metal matrix composite, CNC milling, Surface roughness, Response surface methodology
Kaynak
Arabian Journal For Science And Engineering
WoS Q Değeri
N/A
Scopus Q Değeri
Q1
Cilt
39
Sayı
4
