Performances of different eco-friendly nanofluid lubricants in the milling of Inconel X-750 superalloy
Yükleniyor...
Dosyalar
Tarih
2019
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Elsevier Sci Ltd
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
This study investigated the effects of eco-friendly cutting conditions on machining performance in the milling of Inconel X-750 superalloy. To this purpose, a total of 14 different eco-friendly cutting conditions, including dry, base fluid and three different nanofluids at four different concentrations were tested. Surface roughness, cutting temperature, cutting force, tool wear and tool life were addressed as performance criteria. According to the test results, the use of base fluid increased the machining performance significantly compared to the dry cutting; however, the best results on all performance characteristics were obtained under nanofluid cutting conditions. The optimal concentration for the nanofluids was determined as 0.50 vol% and the hexagonal boron nitride (hBN) nanofluid was shown to be superior to the MoS2 and graphite nanofluids.
Açıklama
SIRIN, Senol/0000-0002-3629-9003
WOS: 000472686000018
WOS: 000472686000018
Anahtar Kelimeler
Inconel X-750, Milling, Nanofluids, Tool wear/life
Kaynak
Tribology International
WoS Q Değeri
Q1
Scopus Q Değeri
Q1
Cilt
137
