Wettability and roughness characteristics of modified wood boards using a hot-press
Yükleniyor...
Dosyalar
Tarih
2011
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Elsevier Science Bv
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
The aim of this study was to investigate the effect of the thermal modification process by hot-press on the wettability and surface roughness characteristics of the eucalyptus wood boards. The roughness measurements, average roughness (R(a)), and maximum roughness (R(max)) were taken both parallel and perpendicular to the grain using a fine stylus tracing technique. Contact angle measurements were obtained using a goniometer system connected to a digital camera and computer system. The results showed that surface roughness values of the modified wood boards using a hot-press significantly decreased with increasing press pressure and with decreasing temperature. The contact angle measurements indicated that the thermal modification had a significant influence on the surface wettability of the wood boards. Statistical analyses showed significant differences in the surface roughness and contact angle values of the wood boards following thermal modification. The results acquired in this work provide important information for future research and utilization of the thermally modified wood boards. (C) 2011 Elsevier B.V. All rights reserved.
Açıklama
Korkut, Suleyman/0000-0002-4871-354X
WOS: 000294036100008
WOS: 000294036100008
Anahtar Kelimeler
Thermal modification, Wettability, Contact angle, Surface roughness, Wood boards
Kaynak
Industrial Crops And Products
WoS Q Değeri
Q1
Scopus Q Değeri
Q1
Cilt
34
Sayı
3
