The effects of cryogenic-treated carbide tools on tool wear and surface roughness of turning of Hastelloy C22 based on Taguchi method

Basit Öğe Kaydı
dc.contributor.authorAkıncıoğlu, Sıtkı
dc.contributor.authorGökkaya, Hasan
dc.contributor.authorUygur, İlyas
dc.date.accessioned2020-04-30T23:33:19Z
dc.date.available2020-04-30T23:33:19Z
dc.date.issued2016
dc.departmentDÜ, Gümüşova Meslek Yüksekokuluen_US
dc.descriptionAKINCIOGLU, Sitki/0000-0003-4073-4837en_US
dc.descriptionWOS: 000368080400023en_US
dc.description.abstractIn this study, Taguchi method has been applied to evaluate the effect of cryogenically treated tools in turning of Hastelloy C22 super alloy on surface roughness. The optimum parameters (cryogenic treatment, cutting speed, and feed rate) of turning were determined by using the Taguchi experimental design method. In Taguchi method, L9 orthogonal array has been used to determine the signal noise (S/N) ratio. Analysis of ANOVA was carried out to identify the significant factors affecting surface roughness. The statistical analysis indicated that feed rate, with a contribution percentage as high as 87.64 %, had the most dominant effect on machining performance, followed by the cryo-treated tools treatment and cutting speed, respectively. The confirmation tests indicated that it is possible to improve surface roughness significantly by using the Taguchi method. Surface roughness was improved by 28.3 and 72.3 % by shallow (CT1) cryogenic treatment and deep cryogenic treatment (CT2) applied on cementite carbide tools (UT). It found that wear resistance of tungsten carbide insert was increased by shallow and deep cryogenic treatments.en_US
dc.description.sponsorshipDuzce University, Division of Scientific Research ProjectsDuzce University [2013.06.05.178]en_US
dc.description.sponsorshipThe authors would like to thank Duzce University, Division of Scientific Research Projects for their support with project no: 2013.06.05.178.en_US
dc.identifier.doi10.1007/s00170-015-7356-zen_US
dc.identifier.endpage314en_US
dc.identifier.issn0268-3768
dc.identifier.issn1433-3015
dc.identifier.issue01.Apren_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage303en_US
dc.identifier.urihttps://doi.org/10.1007/s00170-015-7356-z
dc.identifier.urihttps://hdl.handle.net/20.500.12684/4946
dc.identifier.volume82en_US
dc.identifier.wosWOS:000368080400023en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer London Ltden_US
dc.relation.ispartofInternational Journal Of Advanced Manufacturing Technologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCryogenic treatmenten_US
dc.subjectCarbide inserten_US
dc.subjectSurface roughnessen_US
dc.subjectTaguchi methoden_US
dc.subjectWear resistanceen_US
dc.titleThe effects of cryogenic-treated carbide tools on tool wear and surface roughness of turning of Hastelloy C22 based on Taguchi methoden_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
4946.pdf
Boyut:
1.12 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu