An investigation of Al2O3-ZrO(2)ceramic composite-coated engine parts using plasma spray method on a diesel engine
Yükleniyor...
Dosyalar
Tarih
2020
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Taylor & Francis Ltd
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In this study, the surfaces of the piston, cylinder head and valve parts of the combustion chambers for a single-cylinder diesel engine were coated at 250 mu m thick ceramic composite Al2O3-ZrO2(20-80%) main coating material and 100 mu m NiCrAl interlayer material. Also, B6 and B12 biodiesel fuels were produced. Fuel blends were tested on a diesel engine with thermal barrier-coated surfaces for 50 h under the same conditions. When the SEM images and the EDS analysis results of the pistons covered with the ceramic composite main coating material are examined, it has been seen that the coating material permeates the surfaces in a very homogeneous manner and allows to work with high performance without causing any deterioration on the surfaces during working. At high temperatures, the working periods of 50 h and the formation of smoke did not cause any damage to the main material and the coating material.
Açıklama
Anahtar Kelimeler
Diesel engine, sunflower oil, thermal barrier coating, biodiesel, SEM, Corrosion Behavior, Wear Behavior, Al2O3, Coatings, Alumina, Oil
Kaynak
International Journal Of Ambient Energy
WoS Q Değeri
N/A
Scopus Q Değeri
Q2
Cilt
41
Sayı
9
