Taguchi optimization of machining parameters in drilling of AISI D2 steel using cryo-treated carbide drills

Basit Öğe Kaydı
dc.contributor.authorAkıncıoğlu, Gülşah
dc.contributor.authorMendi, Faruk
dc.contributor.authorÇiçek, Adem
dc.contributor.authorAkıncıoğlu, Sıtkı
dc.date.accessioned2020-04-30T23:32:32Z
dc.date.available2020-04-30T23:32:32Z
dc.date.issued2017
dc.departmentDÜ, Gümüşova Meslek Yüksekokulu, Makine ve Metal Teknolojileri Bölümüen_US
dc.descriptionAKINCIOGLU, Sitki/0000-0003-4073-4837;en_US
dc.descriptionWOS: 000398922500007en_US
dc.description.abstractThis study focused on using the Taguchi technique to optimize the process parameters in drilling of AISI D2 steel with carbide drills to minimize the surface roughness (Ra) and thrust forces (Ff). The drilling experiments were conducted on a CNC vertical machining centre according to the L18 experimental design. Uncoated drills were classified into three groups: untreated (U), cryo-treated (CT) and cryo-treated and tempered (CTT). The experimental results showed that the CTT drills exhibited the best performance in terms of Ra and Ff due to the improved wear resistance of carbide drills after the cryogenic treatment and tempering. As a result of analysis of variance (ANOVA), it was found that the most influential parameter on both Ra and Ff was the feed rate, with percentage contributions of 66.97% and 80.07%, respectively. The results showed that the Taguchi technique is a powerful method to optimize the process parameters in drilling of tool steel.en_US
dc.identifier.doi10.1007/s12046-017-0598-8en_US
dc.identifier.endpage222en_US
dc.identifier.issn0256-2499
dc.identifier.issn0973-7677
dc.identifier.issue2en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage213en_US
dc.identifier.urihttps://doi.org/10.1007/s12046-017-0598-8
dc.identifier.urihttps://hdl.handle.net/20.500.12684/4745
dc.identifier.volume42en_US
dc.identifier.wosWOS:000398922500007en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer Indiaen_US
dc.relation.ispartofSadhana-Academy Proceedings In Engineering Sciencesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectTaguchi methoden_US
dc.subjectcryo-treatmenten_US
dc.subjectthrust forceen_US
dc.subjectsurface roughnessen_US
dc.titleTaguchi optimization of machining parameters in drilling of AISI D2 steel using cryo-treated carbide drillsen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
4745.pdf
Boyut:
2.07 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu