DIAGONAL TENSILE STRENGTH OF AN ORIENTED STRAND-BOARD (OSB) FRAME WITH DOVETAIL CORNER JOINT

Basit Öğe Kaydı
dc.contributor.authorÖzkaya, Kadir
dc.contributor.authorBurdurlu, Erol
dc.contributor.authorİlçe, A. Cemil
dc.contributor.authorCiritcioğlu, Hasan Hüseyin
dc.date.accessioned2020-05-01T09:11:24Z
dc.date.available2020-05-01T09:11:24Z
dc.date.issued2010
dc.departmentDÜ, Teknik Eğitim Fakültesi, Mobilya ve Dekorasyon Eğitimi Bölümüen_US
dc.descriptionCiritcioglu, Hasan/0000-0002-8694-0663en_US
dc.descriptionWOS: 000284038700014en_US
dc.description.abstractIt was aimed in this study to determine the effect of the number of joints in frames produced from Oriented Strand Board (OSB) and of the type of adhesive on the diagonal tensile strength (DTS) of the frame. With this objective, a total of 152 specimens were prepared from OSB in accordance with the principles in the EN 2470 test standard. The diagonal tensile test was applied to the specimens in the universal test equipment in accordance with ASTM-D 1037. According to the statistical analysis of the data obtained from the tests, the number of dovetail joints and the type of adhesive had significant effects on the DTS. The highest DTS (0.117 N/mm(2)) was obtained in the specimens with a single dovetail joint and bonded with the PVAc adhesive. This alternative was followed by the specimens with a double dovetail joint bonded with the PVAc adhesive (0.078 N/mm(2)) and the specimens with a single dovetail joint bonded with the PU adhesive (0.073 N/mm(2)). The lowest DTS occurred in the specimens with single and double joints without adhesive. According to these results, adhesive should definitely be used in the corner joining of the dovetail joints, and the single dovetail joint joining type bonded with PVAc adhesive is preferred.en_US
dc.identifier.endpage2701en_US
dc.identifier.issn1930-2126
dc.identifier.issue4en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage2690en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12684/5571
dc.identifier.volume5en_US
dc.identifier.wosWOS:000284038700014en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherNorth Carolina State Univ Dept Wood & Paper Scien_US
dc.relation.ispartofBioresourcesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectFrame corner joiningen_US
dc.subjectDovetail jointen_US
dc.subjectOSBen_US
dc.subjectTensile strengthen_US
dc.titleDIAGONAL TENSILE STRENGTH OF AN ORIENTED STRAND-BOARD (OSB) FRAME WITH DOVETAIL CORNER JOINTen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
5571.pdf
Boyut:
223.52 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu