Investigation of formability of HC380LA material via the TPIF-RL incremental forming method

Basit Öğe Kaydı
dc.contributor.authorŞen, Nuri
dc.contributor.authorTaşdemir, Vedat
dc.contributor.authorSeçgin, Ömer
dc.date.accessioned2020-04-30T23:18:37Z
dc.date.available2020-04-30T23:18:37Z
dc.date.issued2019
dc.departmentDÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.descriptionSECGIN, OMER/0000-0001-6158-3164en_US
dc.descriptionWOS: 000507266100001en_US
dc.description.abstractPrototype parts can be produced rapidly and at low cost using the incremental forming method. The most important problem with this method is that it causes undesirable variations in wall thickness. Various methods have been developed to improve the wall thickness distribution of the part resulting from forming. One of these techniques, the rolling blank holder (TPIF-RL) method, was used in this study to form 1 mm-thick HC380LA sheet. The Taguchi experimental design was used to determine optimum levels of each of the parameters (forming force, surface roughness and wall thickness) separately via signal/noise analysis. Gray Relational Analysis was then performed to determine the parameters that optimize surface roughness and wall thickness together. In the study, it was determined that the use of low pressing force increases the wall thickness. As a result, a 6% increase in wall thickness was achieved by using the optimum parameters.en_US
dc.identifier.doi10.1080/03019233.2019.1711351en_US
dc.identifier.issn0301-9233
dc.identifier.issn1743-2812
dc.identifier.scopusqualityQ2en_US
dc.identifier.urihttps://doi.org/10.1080/03019233.2019.1711351
dc.identifier.urihttps://hdl.handle.net/20.500.12684/3442
dc.identifier.wosWOS:000507266100001en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherTaylor & Francis Ltden_US
dc.relation.ispartofIronmaking & Steelmakingen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectIncremental formingen_US
dc.subjectTPIF-RLen_US
dc.subjectsheet thicknessen_US
dc.subjectHC380LAen_US
dc.subjectGray Relational Analysisen_US
dc.subjectTaguchien_US
dc.titleInvestigation of formability of HC380LA material via the TPIF-RL incremental forming methoden_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
3442.pdf
Boyut:
1.1 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu