Effect of Heat Treatment (ThermoWood) on Some Surface Properties of Parquet Beech (Fagus orientalis Lipsky.) with Different Layers of UV System Applied

Basit Öğe Kaydı
dc.contributor.authorAyata, Ümit
dc.contributor.authorGürleyen, Levent
dc.contributor.authorEsteves, Bruno
dc.contributor.authorGürleyen, Tuğba
dc.contributor.authorÇakıcıer, Nevzat
dc.date.accessioned2020-05-01T09:11:40Z
dc.date.available2020-05-01T09:11:40Z
dc.date.issued2017
dc.departmentDÜ, Orman Fakültesi, Orman Endüstrisi Mühendisliği Bölümüen_US
dc.descriptionEsteves, Bruno/0000-0001-6660-3128; ayata, umit/0000-0002-6787-7822en_US
dc.descriptionWOS: 000402883700120en_US
dc.description.abstractHeat treatment is known to improve the stability and durability of various woods. However, in the process some surface properties are changed. This paper reports the changes in surface properties such as color, glossiness, pendulum hardness, and surface adhesion on coated heat-treated and untreated beech wood. The wood was coated with an epoxy acrylic resin sealer followed by a polyacrylic-based resin varnish that is normally applied on parquet with single and double layers according to the manufacturer's recommendations. The results showed that in relation to color parameters, the lightness decreased while a* increased in response to heat treatment. This was followed by a decrease in the redness (a*) and a decrease in yellow (b*) with the intensity of the treatment. There was an initial increase in the glossiness but it decreased later on with the severity of the treatment. The hardness and adhesion also decreased with the severity of the treatment for beech coated with single and double layers. The wood surface properties depended on the treating time and the temperature of the treatment.en_US
dc.identifier.doi10.15376/biores.12.2.3876-3889en_US
dc.identifier.endpage3889en_US
dc.identifier.issn1930-2126
dc.identifier.issue2en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage3876en_US
dc.identifier.urihttps://doi.org/10.15376/biores.12.2.3876-3889
dc.identifier.urihttps://hdl.handle.net/20.500.12684/5715
dc.identifier.volume12en_US
dc.identifier.wosWOS:000402883700120en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherNorth Carolina State Univ Dept Wood & Paper Scien_US
dc.relation.ispartofBioresourcesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectParquet Beechen_US
dc.subjectHeat treatmenten_US
dc.subjectGlossinessen_US
dc.subjectColor, Adhesionen_US
dc.titleEffect of Heat Treatment (ThermoWood) on Some Surface Properties of Parquet Beech (Fagus orientalis Lipsky.) with Different Layers of UV System Applieden_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
5715.pdf
Boyut:
655.78 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu