OPTIMIZATION OF THE MACHINING PARAMETERS FOR THE TURNING OF 15-5 PH STAINLESS STEELS USING THE TAGUCHI METHOD

Basit Öğe Kaydı
dc.contributor.authorÇetin, Şerif
dc.contributor.authorKıvak, Turgay
dc.date.accessioned2020-04-30T23:20:21Z
dc.date.available2020-04-30T23:20:21Z
dc.date.issued2017
dc.departmentDÜ, Teknoloji Fakültesi, Makine ve İmalat Mühendisliği Bölümüen_US
dc.descriptionWOS: 000396592900021en_US
dc.description.abstractThe present study investigated the effects of the control factors of cutting speed, feed rate and depth of cut on the response variables of cutting force (F-c) and surface roughness (R-a) in the dry turning of 15-5 PH martensitic stainless steel. Using PVD TiAlN-AlCrO- and CVD TiCN-Al2O3-TiN-coated carbide-cutting-tool inserts, a number of turning experiments were conducted via the L-18 (2(1)x3(3)) Taguchi mixed orthogonal array. The machining parameters were optimized using signal-to-noise ratio (S/N) and analysis of variance (ANOVA). Additionally, empirical models were created for predicting the F-c and R-a using multiple-regression analysis. The results indicated that depth of cut was the most significant cutting parameter affecting F-c, while the feed rate contributed the most to R-a. The developed quadratic regression model, showing a high determination coefficient of 0.981 for F-c and 0.988 for R-a, accurately explained the relationship between the response variable and the control factors.en_US
dc.description.sponsorshipDuzce University Scientific Research Project DivisionDuzce University [BAP 2014.07.04.217]en_US
dc.description.sponsorshipThe authors wish to place their sincere thanks to Duzce University Scientific Research Project Division for financial support for the Project No: BAP 2014.07.04.217.en_US
dc.identifier.doi10.17222/mit.2016.007en_US
dc.identifier.endpage140en_US
dc.identifier.issn1580-2949
dc.identifier.issn1580-3414
dc.identifier.issue1en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage133en_US
dc.identifier.urihttps://doi.org/10.17222/mit.2016.007
dc.identifier.urihttps://hdl.handle.net/20.500.12684/3989
dc.identifier.volume51en_US
dc.identifier.wosWOS:000396592900021en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherInst Za Kovinske Materiale I In Tehnologieen_US
dc.relation.ispartofMateriali In Tehnologijeen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectTaguchi methoden_US
dc.subjectturningen_US
dc.subjectcutting forceen_US
dc.subjectsurface roughnessen_US
dc.subject15-5 PH steelen_US
dc.titleOPTIMIZATION OF THE MACHINING PARAMETERS FOR THE TURNING OF 15-5 PH STAINLESS STEELS USING THE TAGUCHI METHODen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
3989.pdf
Boyut:
1.21 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu