OPTIMIZATION OF THE MACHINING PARAMETERS FOR THE TURNING OF 15-5 PH STAINLESS STEELS USING THE TAGUCHI METHOD
Yükleniyor...
Dosyalar
Tarih
2017
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Inst Za Kovinske Materiale I In Tehnologie
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
The present study investigated the effects of the control factors of cutting speed, feed rate and depth of cut on the response variables of cutting force (F-c) and surface roughness (R-a) in the dry turning of 15-5 PH martensitic stainless steel. Using PVD TiAlN-AlCrO- and CVD TiCN-Al2O3-TiN-coated carbide-cutting-tool inserts, a number of turning experiments were conducted via the L-18 (2(1)x3(3)) Taguchi mixed orthogonal array. The machining parameters were optimized using signal-to-noise ratio (S/N) and analysis of variance (ANOVA). Additionally, empirical models were created for predicting the F-c and R-a using multiple-regression analysis. The results indicated that depth of cut was the most significant cutting parameter affecting F-c, while the feed rate contributed the most to R-a. The developed quadratic regression model, showing a high determination coefficient of 0.981 for F-c and 0.988 for R-a, accurately explained the relationship between the response variable and the control factors.
Açıklama
WOS: 000396592900021
Anahtar Kelimeler
Taguchi method, turning, cutting force, surface roughness, 15-5 PH steel
Kaynak
Materiali In Tehnologije
WoS Q Değeri
Q4
Scopus Q Değeri
Q3
Cilt
51
Sayı
1
