On the profile of temperature and voltage dependence of interface states and resistivity in Au/n-Si structure with 79 angstrom insulator layer thickness

dc.contributor.authorYıldırım, Mert
dc.contributor.authorEroğlu, A.
dc.contributor.authorAltındal, S.
dc.contributor.authorDurmuş, P.
dc.date.accessioned2020-04-30T23:20:10Z
dc.date.available2020-04-30T23:20:10Z
dc.date.issued2011
dc.departmentDÜ, Fen-Edebiyat Fakültesi, Fizik Bölümüen_US
dc.descriptionYILDIRIM, Mert/0000-0002-8526-1802en_US
dc.descriptionWOS: 000288624300017en_US
dc.description.abstractIn this study, the temperature and voltage dependence of interface states (N-ss) and resistance profile of Au/n-Si structure with 79 angstrom insulator layer thickness were obtained from the forward and reverse bias capacitance-voltage (C-V) and conductance-voltage (G/omega-V) measurements in the temperature range of 80-400 K at 1 MHz. The main electrical parameters, such as doping concentration (N-D), Fermi energy level (E-F), depletion layer width (W-D) and barrier height (phi(CV)), of these structures were also determined from the reverse bias C-2 vs V plots in the same range. The values of phi(CV) at the absolute temperature (T=0 K) and the temperature coefficient (alpha) of barrier height were found as 1.152 eV and -2.4x10(-4) eV/K, respectively. These values are in a close agreement with the bandgap value of Si at 0 K (E-g=1.17 eV) and its temperature coefficient value (-4.73x10(4) eV/K). C-V plots for all temperature levels show an anomalous peak in the accumulation region because of the effect of series resistance (Rs). Similarly, G/omega-V plots also show a peak in the depletion region between the temperature range of 160-320 K. The effect of R-s on the C and G is found noticeable especially at high temperatures. Therefore, the measured C and G values were corrected in order to eliminate the effect of R-s using Nicollian and Brews method. In addition, the temperature dependent ac conductivity (sigma(ac)) data obtained between 200 and 400 K show a linear behavior and was fitted to the Arrhenius plot. The values of activation energy (E-a) obtained from the slope In square-q/kT plots are 21.7, 18.5, 15.0 and 11.5 meV for the values of applied biases 3.5, 4.0, 4.5 and 5.0 V, respectively.en_US
dc.description.sponsorshipGazi UniversityGazi University [FEF. 05/2010-16]en_US
dc.description.sponsorshipThis work is supported by Gazi University Scientific Research Project (BAP), FEF. 05/2010-16.en_US
dc.identifier.endpage105en_US
dc.identifier.issn1454-4164
dc.identifier.issn1841-7132
dc.identifier.issue01.Feben_US
dc.identifier.scopusqualityQ4en_US
dc.identifier.startpage98en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12684/3947
dc.identifier.volume13en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherNatl Inst Optoelectronicsen_US
dc.relation.ispartofJournal Of Optoelectronics And Advanced Materialsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMS structure with insulator layeren_US
dc.subjectTemperature dependent barrier heighten_US
dc.subjectVoltage dependent resistanceen_US
dc.subjectInterface statesen_US
dc.subjectAnomalous peak in C-V plotsen_US
dc.titleOn the profile of temperature and voltage dependence of interface states and resistivity in Au/n-Si structure with 79 angstrom insulator layer thicknessen_US
dc.typeArticleen_US

Dosyalar