A REVIEW OF MECHANICAL AND THERMAL PROPERTIES OF PRODUCTS PRINTED WITH RECYCLED FILAMENTS FOR USE IN 3D PRINTERS

Basit Öğe Kaydı
dc.authoridAtakök, Gürcan/0000-0002-5275-2429
dc.authoridKam, Menderes/0000-0002-9813-559X
dc.authoridKOC, Hanife Bukre/0000-0002-9115-7534
dc.authorwosidAtakök, Gürcan/A-5687-2018
dc.authorwosidKam, Menderes/V-6908-2017
dc.contributor.authorAtakök, Gürcan
dc.contributor.authorKam, Menderes
dc.contributor.authorKoç, Hanife Bukre
dc.date.accessioned2023-07-26T11:57:20Z
dc.date.available2023-07-26T11:57:20Z
dc.date.issued2022
dc.departmentDÜ, Cumayeri Meslek Yüksekokulu, Makine ve Metal Teknolojileri Bölümüen_US
dc.description.abstractThree-dimensional printers (3DP), which are often heard with additive manufacturing, are widely used in part production. Sensitive and custom-made products in different designs can be produced more easily and quickly, but waste specimen formed after the failed three-dimensional (3D) prints cause waste and environmental pollution from the expensive filament material. It is thought that such problems can be prevented by minimizing the waste when the scrap materials generated as a result of each production are recovered. This study investigated the benefits of recycling all possible waste filament specimens, including the supports removed from the part after the defective products or supported production, by granulating and reusing in the production of new parts in the next 3D production process. Mechanical differences between the 3D specimens produced with virgin filaments to be printed with recycled filaments are investigated and it has been determined that most of the countries cause environmental pollution due to the waste of materials including additive manufacturing and 3DP processes. The use of the filament material, which takes a long time to procure from abroad and is mainly procured externally, will be increased from one time to twice or thrice, thus facilitating the availability and preventing environmental pollution.en_US
dc.identifier.doi10.1142/S0218625X22300027
dc.identifier.issn0218-625X
dc.identifier.issn1793-6667
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-85120881125en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.urihttps://doi.org/10.1142/S0218625X22300027
dc.identifier.urihttps://hdl.handle.net/20.500.12684/13136
dc.identifier.volume29en_US
dc.identifier.wosWOS:000760664700012en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorKam, Menderes
dc.language.isoenen_US
dc.publisherWorld Scientific Publ Co Pte Ltden_US
dc.relation.ispartofSurface Review and Lettersen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.snmz$2023V1Guncelleme$en_US
dc.subjectAdditive Manufacturing; 3d Printer; Filament; Fdm; Recycle; Environmental Pollutionen_US
dc.subjectMaterial-Extrusion; Polymer; Design; System; Optimization; Fabrication; Composites; Virginen_US
dc.titleA REVIEW OF MECHANICAL AND THERMAL PROPERTIES OF PRODUCTS PRINTED WITH RECYCLED FILAMENTS FOR USE IN 3D PRINTERSen_US
dc.typeReview Articleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu