Effect of wood finishing and planing on surface smoothness of finished wood

Basit Öğe Kaydı
dc.contributor.authorBudakçı, Mehmet
dc.contributor.authorGürleyen, Levent
dc.contributor.authorÇınar, Hamza
dc.contributor.authorKorkut, Süleyman
dc.date.accessioned2020-04-30T13:32:23Z
dc.date.available2020-04-30T13:32:23Z
dc.date.issued2007
dc.departmentDÜ, Teknik Eğitim Fakültesi, Mobilya ve Dekorasyon Eğitimi Bölümüen_US
dc.description.abstractThe effect of wood finishing and planning on surface smoothness of finished wood samples of Scots pine (Pinus sylvestris L.) eastern beech (Fagus orientalis L.) and oak (Quercus petraea L.), commonly used woods in the furniture industry in Turkey, was investigated for this study which was carried out in 2006 in the capital city of Ankara in Turkey. Two hundred and forty samples were prepared and processed by planing on the radial and tangential direction to annual rings with 2 and 4 blades. Surface smoothness of the samples was measured according to Turkish Standard (TS) 930. Following that, filling coat and topcoat of polyurethane varnish were applied to surfaces of the samples according to ASTM-D 3023. Then, samples were again subjected to measure for determining the surface smoothness. Statistical data were obtained for surface smoothness from varnished and unvarnished wood samples and it was concluded that finishing increases the surface smoothness. © 2007 Asian Network for Scientific Information.en_US
dc.identifier.doi10.3923/jas.2007.2300.2306en_US
dc.identifier.endpage2306en_US
dc.identifier.issn1812-5654
dc.identifier.issue16en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage2300en_US
dc.identifier.urihttps://dx.doi.org/10.3923/jas.2007.2300.2306
dc.identifier.urihttps://hdl.handle.net/20.500.12684/264
dc.identifier.volume7en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherAsian Network for Scientific Informationen_US
dc.relation.ispartofJournal of Applied Sciencesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectBlades; Finishing; Planing; Surface roughness; Surface smoothness; Wood materialen_US
dc.titleEffect of wood finishing and planing on surface smoothness of finished wooden_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
0264.pdf
Boyut:
360.96 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu