EFFECT OF PINE CONE RATIO ON THE WETTABILITY AND SURFACE ROUGHNESS OF PARTICLEBOARD
dc.contributor.author | Büyüksarı, Ümit | |
dc.contributor.author | Avcı, Erkan | |
dc.contributor.author | Ayrılmış, Nadir | |
dc.contributor.author | Akkılıç, Hüseyin | |
dc.date.accessioned | 2020-05-01T09:11:45Z | |
dc.date.available | 2020-05-01T09:11:45Z | |
dc.date.issued | 2010 | |
dc.department | DÜ, Orman Fakültesi, Orman Mühendisliği Bölümü | en_US |
dc.description | Ayrilmis, Nadir/0000-0002-9991-4800 | en_US |
dc.description | WOS: 000282008700039 | en_US |
dc.description.abstract | In this study, the effect of pine cone ratio on wettability and surface roughness of particleboards was examined. Contact angles of water on the produced samples were measured with a goniometer. The surface roughness of the samples was determined with a fine stylus tracing technique. Particleboards made from 100% wood particle had the lowest average contact angle (95.6 degrees), but the highest was for the particleboards containing 50% pine cone (116.3 degrees). Average surface roughness was higher for samples containing a higher amount of pine cone in the mixture. The smoothest surface (9.77 mu m R-a) was observed when panels were produced using 100% wood particles. On the other hand, the roughest surface (15.50 mu m R-a) was found for the samples containing 50% cone particles in the mixture. R-max and R-z parameters had similar trends to the R-a values. Increasing the pine cone ratio in the mixture negatively affected the contact angle and surface roughness parameters of the particleboard. | en_US |
dc.identifier.endpage | 1833 | en_US |
dc.identifier.issn | 1930-2126 | |
dc.identifier.issue | 3 | en_US |
dc.identifier.scopusquality | Q3 | en_US |
dc.identifier.startpage | 1824 | en_US |
dc.identifier.uri | https://hdl.handle.net/20.500.12684/5748 | |
dc.identifier.volume | 5 | en_US |
dc.identifier.wos | WOS:000282008700039 | en_US |
dc.identifier.wosquality | Q1 | en_US |
dc.indekslendigikaynak | Web of Science | en_US |
dc.indekslendigikaynak | Scopus | en_US |
dc.language.iso | en | en_US |
dc.publisher | North Carolina State Univ Dept Wood & Paper Sci | en_US |
dc.relation.ispartof | Bioresources | en_US |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
dc.rights | info:eu-repo/semantics/openAccess | en_US |
dc.subject | Particleboard | en_US |
dc.subject | Pine cone | en_US |
dc.subject | Surface roughness | en_US |
dc.subject | Wettability | en_US |
dc.title | EFFECT OF PINE CONE RATIO ON THE WETTABILITY AND SURFACE ROUGHNESS OF PARTICLEBOARD | en_US |
dc.type | Article | en_US |
Dosyalar
Orijinal paket
1 - 1 / 1
Yükleniyor...
- İsim:
- 5748.pdf
- Boyut:
- 301.21 KB
- Biçim:
- Adobe Portable Document Format
- Açıklama:
- Tam Metin / Full Text