The Design of Fatigue Test Machine and the Analysis of Fatigue Behavior of FSWed Dissimilar Aluminum Alloys

Basit Öğe Kaydı
dc.authoridKAHRAMAN, Nizamettin/0000-0002-7152-3795
dc.authorwosidKAHRAMAN, Nizamettin/GVS-0885-2022
dc.contributor.authorYuruk, A.
dc.contributor.authorCeylan, Bayram
dc.contributor.authorKahraman, N.
dc.date.accessioned2023-07-26T11:57:16Z
dc.date.available2023-07-26T11:57:16Z
dc.date.issued2022
dc.departmentDÜ, Ziraat Fakültesi, Biyosistem Mühendisliği Bölümüen_US
dc.description.abstractAluminum alloys have low density and high yield strength, thus leading them to be commonly used in aircrafts, sea vessels and land vehicles to acquire light weight and their use in these industries has been increasing every passing day. It is necessary to assemble many dissimilar aluminum alloys in such a way that they fit one another in the application. However, the parts made of these alloys are exposed to very different stresses (tensile, bending, impact, etc.) and fatigue occurs in the parts working especially under dynamic loads by causing structural damage. In this study, a computer-based fatigue test machine was designed and manufactured in order to do the fatigue tests for plate-type materials. This machine was used for the fatigue tests of dissimilar aluminum alloys (AA5754/AA6013) welded by the friction stir welding (FSW). FSW was carried out at 12.5, 25, and 32 mm/min welding feed rates and 1250 rpm. In addition, metallographic examinations and hardness tests were carried out to determine macrostructural and microstructural properties of weld zones and the effects of the joints on fatigue strength. The findings of the tests were evaluated and interpreted. The new machine successfully tested the fatigue of the FSWed samples. It was determined that in FSW, welding feed rate and material type were effective on the heat input, microstructure, hardness distribution of the weld zone and fatigue strength and life of the joints.en_US
dc.description.sponsorshipKarabuk University Scientific Research Project Committee [KBUBAP-17-DR-406]en_US
dc.description.sponsorshipThe authors would like to thank the Karabuk University Scientific Research Project Committee for funding for KBUBAP-17-DR-406.en_US
dc.identifier.doi10.1007/s40799-022-00564-7
dc.identifier.issn0732-8818
dc.identifier.issn1747-1567
dc.identifier.scopus2-s2.0-85127697692en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.urihttps://doi.org/10.1007/s40799-022-00564-7
dc.identifier.urihttps://hdl.handle.net/20.500.12684/13102
dc.identifier.wosWOS:000779779500001en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorCeylan, Bayram
dc.language.isoenen_US
dc.publisherSpringeren_US
dc.relation.ispartofExperimental Techniquesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.snmz$2023V1Guncelleme$en_US
dc.subjectFsw; Aluminum; Aa5754; Aa6013; Microstructure; Fatigue Strengthen_US
dc.subjectMechanical-Properties; Microstructural Properties; Welding Parameters; Friction; Mig; Strength; Joints; Speed; Lifeen_US
dc.titleThe Design of Fatigue Test Machine and the Analysis of Fatigue Behavior of FSWed Dissimilar Aluminum Alloysen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
13102.pdf
Boyut:
2.24 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu