Analysis of tool vibration and surface roughness during turning process of tempered steel samples using Taguchi method

Basit Öğe Kaydı
dc.authoridkam, Menderes/0000-0002-9813-559X
dc.authorwosidKam, Menderes/V-6908-2017
dc.contributor.authorKam, Menderes
dc.contributor.authorDemirtas, Mustafa
dc.date.accessioned2021-12-01T18:47:01Z
dc.date.available2021-12-01T18:47:01Z
dc.date.issued2021
dc.department[Belirlenecek]en_US
dc.description.abstractThis study analyzed the tool vibration (Vib) and surface roughness (Ra) during turning of AISI 4340 (34CrNiMo6) tempered steel samples using Taguchi Method. In this context, Taguchi design L-18 (2(1) x 3(2)) was used to analyze the experimental results. The vibration amplitude values from cutting tools were recorded for different machining parameters, control factors; two different sample hardness (46 and 53 HRc), three different cutting speeds (180, 220, 260 m.min(-1)), and feed rates (0.08, 0.14, 0.20 mm.rev(-1)) were selected. The machining parameters giving optimum Vib and Ra values were determined. Regression analysis is applied to predict values of Vib and Ra. Analysis of variance was used to determine the effects of machining parameters on the Vib and Ra values. The most important machining parameters were found to be the feed rate, sample hardness, and cutting speed for Vib and Ra, respectively. The lowest Vib and Ra values were obtained in 46 HRc sample as 0.0022 gRMS and 0.255 mu m, respectively. The surface quality can be improved by reducing the sources of vibration by using appropriate machining parameters. As a result, there is a significant relationship between Ra and Vib. The lower Ra values were found during turning process of tempered steel samples according to the literature studies. It is suggested that the process can be preferred as an alternative process to grinding process due to lower cost and machining time. In application of the turning of experiment samples by ceramic cutting tool, a substantial technological and economical benefit has been observed.en_US
dc.description.sponsorshipScientific Research Projects Coordination (BAP) of the University of Duzce [BAP-2019.22.01.911]en_US
dc.description.sponsorshipThe author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: The authors would like to acknowledge the support of Scientific Research Projects Coordination (BAP) of the University of Duzce for the project entitled BAP-2019.22.01.911.en_US
dc.identifier.doi10.1177/09544089211001976
dc.identifier.endpage1438en_US
dc.identifier.issn0954-4089
dc.identifier.issn2041-3009
dc.identifier.issue5en_US
dc.identifier.scopus2-s2.0-85102813462en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage1429en_US
dc.identifier.urihttps://doi.org/10.1177/09544089211001976
dc.identifier.urihttps://hdl.handle.net/20.500.12684/10104
dc.identifier.volume235en_US
dc.identifier.wosWOS:000635995200001en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSage Publications Ltden_US
dc.relation.ispartofProceedings Of The Institution Of Mechanical Engineers Part E-Journal Of Process Mechanical Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAISI 4340en_US
dc.subjecttempered steelen_US
dc.subjectturningen_US
dc.subjectsurface roughnessen_US
dc.subjectTaguchi methoden_US
dc.subjecttool vibrationen_US
dc.titleAnalysis of tool vibration and surface roughness during turning process of tempered steel samples using Taguchi methoden_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
10104.pdf
Boyut:
828.25 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu