Design and production optimization of pp 20% talc additive filter with plastic injection molding machine

Basit Öğe Kaydı
dc.authorscopusid57290734600
dc.authorscopusid56741121800
dc.contributor.authorOzbakis, Y.
dc.contributor.authorNas, E.
dc.date.accessioned2021-12-01T18:38:55Z
dc.date.available2021-12-01T18:38:55Z
dc.date.issued2021
dc.department[Belirlenecek]en_US
dc.description.abstractIn the paper, the design optimization of the food-contact water tank filter used in industrial kitchen products was made and produced in plastic injection molding machine with different parameters. The effects of production parameters on product weight, fabric filter strength (tearing), production time and surface quality (burrs and gas gap) were investigated experimentally and statistically. The design of the experiments was prepared with the Taguchi L27 orthogonal array. Experiment parameters are determined as injection speed (A), holding press (B), holding speed (C), mold temperature (D), melting temperature (E) and compression waiting time (F). As a result, 154% improvement was achieved in the fabric strength as a result of design optimization. As a result of the optimization of the injection parameters of the product, when the response tables were examined, it is determined that the greatest value of filter fabric strength is 298N in A2B2C2D1E1F3 parameters. When ANOVA results are analyzed, the most effective parameter for fabric strength and surface quality was determined as mold temperature with 36.38% and compression waiting time with the lowest effective parameter as 0.08%. © 2021 World Scientific Publishing Company.en_US
dc.identifier.doi10.1142/S0218625X21501134
dc.identifier.issn0218625X
dc.identifier.scopus2-s2.0-85116824322en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.urihttps://doi.org/10.1142/S0218625X21501134
dc.identifier.urihttps://hdl.handle.net/20.500.12684/9914
dc.identifier.wosWOS:000722079700007en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherWorld Scientificen_US
dc.relation.ispartofSurface Review and Lettersen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectANOVAen_US
dc.subjectFilter strengthen_US
dc.subjectInjection machineen_US
dc.subjectRegressionen_US
dc.subjectTaguchi methoden_US
dc.titleDesign and production optimization of pp 20% talc additive filter with plastic injection molding machineen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu