Design and production optimization of pp 20% talc additive filter with plastic injection molding machine
Küçük Resim Yok
Tarih
2021
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
World Scientific
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In the paper, the design optimization of the food-contact water tank filter used in industrial kitchen products was made and produced in plastic injection molding machine with different parameters. The effects of production parameters on product weight, fabric filter strength (tearing), production time and surface quality (burrs and gas gap) were investigated experimentally and statistically. The design of the experiments was prepared with the Taguchi L27 orthogonal array. Experiment parameters are determined as injection speed (A), holding press (B), holding speed (C), mold temperature (D), melting temperature (E) and compression waiting time (F). As a result, 154% improvement was achieved in the fabric strength as a result of design optimization. As a result of the optimization of the injection parameters of the product, when the response tables were examined, it is determined that the greatest value of filter fabric strength is 298N in A2B2C2D1E1F3 parameters. When ANOVA results are analyzed, the most effective parameter for fabric strength and surface quality was determined as mold temperature with 36.38% and compression waiting time with the lowest effective parameter as 0.08%. © 2021 World Scientific Publishing Company.
Açıklama
Anahtar Kelimeler
ANOVA, Filter strength, Injection machine, Regression, Taguchi method
Kaynak
Surface Review and Letters
WoS Q Değeri
Q4
Scopus Q Değeri
Q3
