Taguchi and Gray Relational Analysis Optimization of Cutting Parameters during Face Milling of Cryogenic Treated Aluminum 6061 Alloys Using Cryogenic and Non-cryogenic Inserts

Basit Öğe Kaydı
dc.authorscopusid8413639900
dc.authorscopusid55557926500
dc.contributor.authorSamtaş, Gürcan
dc.contributor.authorApay, S.
dc.date.accessioned2023-07-26T11:57:44Z
dc.date.available2023-07-26T11:57:44Z
dc.date.issued2023
dc.departmentDÜ, Mühendislik Fakültesi, Mekatronik Mühendisliği Bölümüen_US
dc.description.abstractHigh hardness and exceptional machinability characterize the 6061 aluminum alloy. It is also a substance that welds nicely. It is extensively utilized in the railroad, shipbuilding, and aviation industries. This study used the face milling process on cryogenically treated aluminum 6061 alloys with normal and cryogenically treated PVD-AlTiN coated inserts. An orthogonal Taguchi L18 array was utilized to plan the experiment. Three cutting speeds, three different feed rates, and two different cutting inserts with conventional and cryogenic treatment were the cutting parameters employed in the studies. Roughness measurements were made after each experiment. In addition, each experiment was repeated six times, and the wear of the cutting insert was measured. The optimization of wear and roughness parameters employed the Taguchi method. Additionally, wear and roughness variables were co-optimized using Gray Relational Analysis (GRA). Taguchi optimization settings were optimized for the smallest surface roughness; the standard insert had a cutting speed of 250 m/min and a feed rate of 0.15 mm/rev. Optimized wear parameters include non-cryogenically treated (untreated) inserts, 350 m/min cutting speed, and 0.30 mm/rev feed rate. In the optimization using GRA, the non-cryogenically treated insert, 450 m/min cutting speed, and 0.15 mm/rev feed rate are the standard optimum parameters for roughness and wear. In terms of little wear and roughness, non-cryogenically treated inserts fared best, according to Taguchi and GRA findings. © 2023, ASM International.en_US
dc.identifier.doi10.1007/s11665-023-08048-4
dc.identifier.issn1059-9495
dc.identifier.scopus2-s2.0-85150190360en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.urihttps://doi.org/10.1007/s11665-023-08048-4
dc.identifier.urihttps://hdl.handle.net/20.500.12684/13288
dc.identifier.wosWOS:000950453300005en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorSamtaş, Gürcan
dc.institutionauthorApay, S.
dc.language.isoenen_US
dc.publisherSpringeren_US
dc.relation.ispartofJournal of Materials Engineering and Performanceen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.snmz$2023V1Guncelleme$en_US
dc.subjectAA 6061en_US
dc.subjectcryogenic treatmenten_US
dc.subjectface millingen_US
dc.subjectgrey relational analysisen_US
dc.subjectTaguchien_US
dc.subjectAluminum alloysen_US
dc.subjectCryogenicsen_US
dc.subjectCuttingen_US
dc.subjectCutting toolsen_US
dc.subjectMilling (machining)en_US
dc.subjectSurface roughnessen_US
dc.subjectTaguchi methodsen_US
dc.subjectTurningen_US
dc.subject6061 alloysen_US
dc.subjectAA 6061en_US
dc.subjectAluminium 6061en_US
dc.subjectCutting parametersen_US
dc.subjectCutting speeden_US
dc.subjectFace-millingen_US
dc.subjectFeedrateen_US
dc.subjectGrey relational analysisen_US
dc.subjectOptimisationsen_US
dc.subjectTaguchien_US
dc.subjectWear of materialsen_US
dc.titleTaguchi and Gray Relational Analysis Optimization of Cutting Parameters during Face Milling of Cryogenic Treated Aluminum 6061 Alloys Using Cryogenic and Non-cryogenic Insertsen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
13088.pdf
Boyut:
1 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu