Evaluation of Nano Fluids with Minimum Quantity Lubrication in Turning of Ni-Base Superalloy UDIMET 720

Basit Öğe Kaydı
dc.authoridOZBEK, Onur/0000-0002-8372-3487en_US
dc.authorscopusid35775392900en_US
dc.contributor.authorOzbek, Onur
dc.date.accessioned2024-08-23T16:03:36Z
dc.date.available2024-08-23T16:03:36Z
dc.date.issued2023en_US
dc.departmentDüzce Üniversitesien_US
dc.description.abstractThis article focuses on turning superalloy Udimet 720, which is difficult to work with, using different coolant/lubricant methods. The study includes delivering Graphene and Multi-Walled Carbon Nanotubes nanopowders homogeneously dispersed in vegetable oil to the cutting area with the minimum quantity lubrication (MQL) method. Experiments at different cutting speeds and feed rates were repeated in four different cutting environments. Compared to dry turning, the cutting zone temperature of the cutting fluid delivered to the cutting zone by MQL methods decreased. In addition, thanks to the nanopowders, it formed an oil film by better penetrating the cutting tool-chip interface and reducing the cutting tool's wear. With the reduced cutting tool wear, the cutting tool could maintain its form for a longer period of time, so better quality surfaces were obtained on the workpiece surface. As a result of the study, it was found that cutting zone temperature improved by 30%, tool wear by 51.8% and surface roughness by 43.9%.en_US
dc.identifier.doi10.3390/lubricants11040159
dc.identifier.issn2075-4442
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-85156097966en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.urihttps://doi.org/10.3390/lubricants11040159
dc.identifier.urihttps://hdl.handle.net/20.500.12684/13813
dc.identifier.volume11en_US
dc.identifier.wosWOS:000977667500001en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorOzbek, Onuren_US
dc.language.isoenen_US
dc.publisherMdpien_US
dc.relation.ispartofLubricantsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectNi-base superalloyen_US
dc.subjectnano MQLen_US
dc.subjectgrapheneen_US
dc.subjectsurface topographyen_US
dc.subjectcutting zone temperatureen_US
dc.subjectcutting tool wearen_US
dc.subjectCutting Fluiden_US
dc.subjectOilen_US
dc.titleEvaluation of Nano Fluids with Minimum Quantity Lubrication in Turning of Ni-Base Superalloy UDIMET 720en_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu