Effect of PVD-TiN and CVD-Al2O3 Coatings on Cutting Force, Surface Roughness, Cutting Power, and Temperature in Hard Turning of AISI H13 Steel

Basit Öğe Kaydı
dc.authoridAkgün, Mahir/0000-0002-4522-066X
dc.authoridözlü, barış/0000-0002-8594-1234
dc.authoridKARA, Fuat/0000-0002-3811-3081
dc.authorwosidAkgün, Mahir/AAJ-9504-2020
dc.authorwosidözlü, barış/AAS-1034-2020
dc.contributor.authorAkgün, Mahir
dc.contributor.authorÖzlü, Bariş
dc.contributor.authorKara, Fuat
dc.date.accessioned2023-07-26T11:57:17Z
dc.date.available2023-07-26T11:57:17Z
dc.date.issued2022
dc.departmentDÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.description.abstractThe present work focusses on the hard turning of AISI H13 tool steel with PVD-TiN- and CVD-Al2O3-coated ceramic cutting tools. In this context, hard turning tests have been performed under dry cutting conditions at five different cutting speeds (120, 165, 210, 255, and 300 m/min), three different feeds (0.12, 0.18, and 0.24 mm/rev), and a constant depth of cut of 0.6 mm. The main cutting force (Fc), surface roughness (Ra), cutting power (Pc), and temperature (T), as well tool wear mechanisms, have been investigated under these subjected conditions. The outcomes of this study show that while feed plays an important role in the main cutting force and surface roughness, cutting speed also plays an important role in cutting power and temperature. The average main cutting force, surface roughness, cutting power, and temperature are 13, 15, 14, and 11% better when AISI H13 alloy is machined with the PVD-TiN-coated inserts than those in the CVD-Al2O3-coated inserts, respectively. SEM examination also revealed that the abrasion and adhesion mechanism is more effective when AISI H13 alloy is machined with the CVD-Al2O3-coated inserts compared to those in the PVD-TiN-coated inserts.en_US
dc.identifier.doi10.1007/s11665-022-07190-9
dc.identifier.issn1059-9495
dc.identifier.issn1544-1024
dc.identifier.scopus2-s2.0-85135750899en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.urihttps://doi.org/10.1007/s11665-022-07190-9
dc.identifier.urihttps://hdl.handle.net/20.500.12684/13110
dc.identifier.wosWOS:000837537700003en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorKara, Fuat
dc.language.isoenen_US
dc.publisherSpringeren_US
dc.relation.ispartofJournal of Materials Engineering and Performanceen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.snmz$2023V1Guncelleme$en_US
dc.subjectAisi H13; Cutting Force; Cutting Power; Cutting Temperature; Hard Turning; Surface Roughnessen_US
dc.subjectWork Tool Steel; Heat Partition; Machinability; Wear; Performance; Cvd; D2en_US
dc.titleEffect of PVD-TiN and CVD-Al2O3 Coatings on Cutting Force, Surface Roughness, Cutting Power, and Temperature in Hard Turning of AISI H13 Steelen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
13110.pdf
Boyut:
3.51 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu