Investigation of the Performance of Ecological Cooling/Lubrication Methods in the Milling of AISI 316L Stainless Steel

Basit Öğe Kaydı
dc.contributor.authorŞirin, Emine
dc.contributor.authorŞirin, Şenol
dc.date.accessioned2025-03-24T19:50:01Z
dc.date.available2025-03-24T19:50:01Z
dc.date.issued2021
dc.departmentDüzce Üniversitesi
dc.description.abstractEcological and eco-friendly cooling/lubrication methods have an important place in the sustainable manufacturing process. The hazards of the conventional cooling can be minimized, and it can be contributed the manufacturing performance, thanks to these ecological systems. In this study, the machinability of AISI 316L stainless steel under ecological cooling/lubrication methods was investigated. The face milling operation was applied to AISI 316L stainless steel for machinability examination under three different cooling cooling/lubricating conditions (minimum quantity lubrication-MQL, LN2 and MQL+LN2), three different cutting speeds (120, 150 and 180 m/min), constant feed rate (0.1 mm/rev) and a constant cutting depth (0.5 mm). The average surface roughness (Ra-µm), maximum cutting temperature (T-°C), and tool wear (VBmax-mm) were selected as machinability performance criteria. At the end of experiments, the lowest value of the maximum cutting temperature (101.1 °C) was obtained at 120 m/min cutting speed under LN2 cutting condition. The lowest value of surface roughness (0.237 µm) was obtained at 150 m/min cutting speed under MQL+LN2 cutting condition. When the experimental results were evaluated in general, it was understood that the MQL+LN2 hybrid cutting condition provided significant improvements in all cutting parameters compared to other cutting conditions.
dc.identifier.endpage84
dc.identifier.issn2717-7475
dc.identifier.issue1
dc.identifier.startpage75
dc.identifier.urihttps://hdl.handle.net/20.500.12684/19439
dc.identifier.volume2
dc.language.isoen
dc.publisherMustafa GÜNAY
dc.relation.ispartofManufacturing Technologies and Applications
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_DergiPark_20250324
dc.subjectAISI 3016L|Milling|MQL|Cryogenic Cooling|Ecological cooling/lubrication
dc.titleInvestigation of the Performance of Ecological Cooling/Lubrication Methods in the Milling of AISI 316L Stainless Steel
dc.typeArticle

Dosyalar

Koleksiyon

Öksüz Yayınlar Koleksiyonu