Investigation of the Performance of Ecological Cooling/Lubrication Methods in the Milling of AISI 316L Stainless Steel
Küçük Resim Yok
Tarih
2021
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Mustafa GÜNAY
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
Ecological and eco-friendly cooling/lubrication methods have an important place in the sustainable manufacturing process. The hazards of the conventional cooling can be minimized, and it can be contributed the manufacturing performance, thanks to these ecological systems. In this study, the machinability of AISI 316L stainless steel under ecological cooling/lubrication methods was investigated. The face milling operation was applied to AISI 316L stainless steel for machinability examination under three different cooling cooling/lubricating conditions (minimum quantity lubrication-MQL, LN2 and MQL+LN2), three different cutting speeds (120, 150 and 180 m/min), constant feed rate (0.1 mm/rev) and a constant cutting depth (0.5 mm). The average surface roughness (Ra-µm), maximum cutting temperature (T-°C), and tool wear (VBmax-mm) were selected as machinability performance criteria. At the end of experiments, the lowest value of the maximum cutting temperature (101.1 °C) was obtained at 120 m/min cutting speed under LN2 cutting condition. The lowest value of surface roughness (0.237 µm) was obtained at 150 m/min cutting speed under MQL+LN2 cutting condition. When the experimental results were evaluated in general, it was understood that the MQL+LN2 hybrid cutting condition provided significant improvements in all cutting parameters compared to other cutting conditions.
Açıklama
Anahtar Kelimeler
AISI 3016L|Milling|MQL|Cryogenic Cooling|Ecological cooling/lubrication
Kaynak
Manufacturing Technologies and Applications
WoS Q Değeri
Scopus Q Değeri
Cilt
2
Sayı
1
