Numerical and experimental investigation of CI engine behaviours supported by zinc oxide nanomaterial along with diesel fuel
Yükleniyor...
Dosyalar
Tarih
2021
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Elsevier Ltd
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Zinc oxide nano additives of 250 ppm, 500 ppm, and 1000 ppm were blended with diesel fuel. The prepared fuels which were designated as DF-250 ppm ZnO, DF-500 ppm ZnO, and DF - 1000 ppm ZnO were tested for engine characteristics along with diesel fuel (DF) in a standard bench-scale engine. All the tests were carried out at different speeds of the engine ranging between 2000 and 3000 rpm with unvarying engine load and advanced injection timing. The outcomes from these experiments exhibited higher brake thermal efficiency and cylinder pressure for fuels with ZnO nano additives than that of diesel fuel. The emission gas temperature and brake-specific fuel consumption were noticed to be lower for fuels blended with ZnO nano additive than those of diesel fuel. The level of SPM emissions also increased in compression ratio from CR = 15.5 to CR = 16.5, but starting from CR of 17.5, the SPM emissions for all the investigated fuels were relatively constant with a slight decrease at the maximum compression ratio. In addition, at all test conditions, NO and SO2 emissions from the engine tail pipe were higher with ZnO mixed diesel fuel. © 2021 Elsevier Ltd
Açıklama
Anahtar Kelimeler
Diesel engine, NO emission, Particulate matter, Sulfur dioxide, Zinc oxide nanoparticles
Kaynak
Energy
WoS Q Değeri
Q1
Scopus Q Değeri
N/A
