Experimental, analytical and parametric evaluation of the springback behavior of MART1400 sheets

Basit Öğe Kaydı
dc.contributor.authorSen, Nuri
dc.contributor.authorCivek, Tolgahan
dc.contributor.authorSeçgin, Ömer
dc.date.accessioned2023-07-26T11:57:30Z
dc.date.available2023-07-26T11:57:30Z
dc.date.issued2022
dc.departmentDÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.description.abstractDue to high amount of springback behavior of MART steels, a large amount of time is wasted during the manufacturing of correct die setup for the intended products. Therefore, many sheet metal forming industries rely on the predicting ability of finite element analysis to reduce their forming costs. In this study, the effects of bending parameters on the springback behavior of MART1400 steel have been investigated by conducting V-bending tests with various die angles (30 degrees, 60 degrees, 90 degrees, and 120 degrees), punch radiuses (2 mm, 4 mm and 6 mm) and force holding times (0 s, 10 s). Furthermore, the predicting ability of different isotropic hardening models (Hollomon, Ghosh, Hocket-Sherby, Swift and Voce) coupled with the Von-Misses yield criterion on the springback behavior of MART1400 steels has been investigated. Additionally, the effect of applying a local heating around the bending area of MART steel on the springback behavior has been parametrically investigated. It has been found that increasing of die angle, and punch radius have resulted in an increase of springback, while a force holding time of 10 s has decreased the springback. Application of heat at 375 degrees C and 475 degrees C around the bending area of MART1400 has resulted in 40.18% and 55.13% reduction of springback due to the lowering of strain hardening.en_US
dc.identifier.doi10.1007/s40430-022-03749-8
dc.identifier.issn1678-5878
dc.identifier.issn1806-3691
dc.identifier.issue10en_US
dc.identifier.scopus2-s2.0-85138040823en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.urihttps://doi.org/10.1007/s40430-022-03749-8
dc.identifier.urihttps://hdl.handle.net/20.500.12684/13205
dc.identifier.volume44en_US
dc.identifier.wosWOS:000852435800003en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorŞen, Nuri
dc.institutionauthorCivek, Tolgahan
dc.language.isoenen_US
dc.publisherSpringer Heidelbergen_US
dc.relation.ispartofJournal of The Brazilian Society of Mechanical Sciences and Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.snmz$2023V1Guncelleme$en_US
dc.subjectV-Bending; Isotropic Hardening Models; Springback; Fea; Mart1400en_US
dc.subjectHigh-Strength Steel; Bending Springback; Prediction; Formability; Warm; Hot; Optimization; Design; Model; Tubeen_US
dc.titleExperimental, analytical and parametric evaluation of the springback behavior of MART1400 sheetsen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
13205.pdf
Boyut:
1.05 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu