Development of a 3-axis Parallel Kinematic Machine for Milling Wood Material - Part 1: Design
dc.contributor.author | Ayyıldız, Elmas Aşkar | |
dc.contributor.author | Ayyıldız, Mustafa | |
dc.date.accessioned | 2020-05-01T09:11:24Z | |
dc.date.available | 2020-05-01T09:11:24Z | |
dc.date.issued | 2017 | |
dc.department | DÜ, Teknik Eğitim Fakültesi, Makine Eğitimi Bölümü | en_US |
dc.description | WOS: 000422879900170 | en_US |
dc.description.abstract | A 3-axis parallel kinematic machine tool and advanced control system with programming in G-code for the milling of wood material are described in detail. This parallel kinematic machine is based on a 3-PSS (prismatic link, spherical link, and spherical link) parallel mechanism. A programming system and control based on a real-time PC windows platform and Mach3 software system was implemented for this tool. Finally, a model application of a programming system developed for a three-degree-of-freedom linear delta parallel machine was presented, and the workability for milling wood material (medium-density fibreboard) was shown. | en_US |
dc.identifier.doi | 10.15376/biores.12.4.9326-9337 | en_US |
dc.identifier.endpage | 9337 | en_US |
dc.identifier.issn | 1930-2126 | |
dc.identifier.issue | 4 | en_US |
dc.identifier.scopusquality | Q3 | en_US |
dc.identifier.startpage | 9326 | en_US |
dc.identifier.uri | https://doi.org/10.15376/biores.12.4.9326-9337 | |
dc.identifier.uri | https://hdl.handle.net/20.500.12684/5563 | |
dc.identifier.volume | 12 | en_US |
dc.identifier.wos | WOS:000422879900170 | en_US |
dc.identifier.wosquality | Q2 | en_US |
dc.indekslendigikaynak | Web of Science | en_US |
dc.indekslendigikaynak | Scopus | en_US |
dc.language.iso | en | en_US |
dc.publisher | North Carolina State Univ Dept Wood & Paper Sci | en_US |
dc.relation.ispartof | Bioresources | en_US |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
dc.rights | info:eu-repo/semantics/openAccess | en_US |
dc.subject | Parallel kinematic machine | en_US |
dc.subject | G-code | en_US |
dc.subject | Milling wood material | en_US |
dc.title | Development of a 3-axis Parallel Kinematic Machine for Milling Wood Material - Part 1: Design | en_US |
dc.type | Article | en_US |
Dosyalar
Orijinal paket
1 - 1 / 1
Yükleniyor...
- İsim:
- 5563.pdf
- Boyut:
- 1.41 MB
- Biçim:
- Adobe Portable Document Format
- Açıklama:
- Tam Metin / Full Text