Precision and accuracy studies with Kajaani fiber length analyzers
Yükleniyor...
Dosyalar
Tarih
2007
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Asian Network for Scientific Information
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
The aim of this study was to test the measurement precision and accuracy of the Kajaani FS-100 giving attention to possible machine error in the measurements. Fiber length of pine pulps produced using polysulfide, kraft, biokraft and soda methods were determined using both FS-100 and FiberLab automated fiber length analyzers. The measured length values were compared for both methods. The measurement precision and accuracy was tested by replicated measurements using rayon stable fibers. Measurements performed on pulp samples showed typical length distributions for both analyzers. Results obtained from Kajaani FS-100 and FiberLab showed a significant correlation. The shorter length measurement with FiberLab was found to be mainly due to the instrument calibration. The measurement repeatability tested for Kajaani FS-100 indicated that the measurements are precise. © 2007 Asian Network for Scientific Information.
Açıklama
Anahtar Kelimeler
Accuracy; Fiber length; Kajaani fiberlab; Kajaani FS-100; Precision
Kaynak
Journal of Applied Sciences
WoS Q Değeri
Scopus Q Değeri
N/A
Cilt
7
Sayı
7
