Weldability of Grade 2 Titanium Sheets with Pulsed Nd:YAG Microlaser Welding Filler and Without Filler

Basit Öğe Kaydı
dc.authoridAPAY, Serkan/0000-0003-4624-9082
dc.contributor.authorApay, Serkan
dc.date.accessioned2023-07-26T11:49:48Z
dc.date.available2023-07-26T11:49:48Z
dc.date.issued2022
dc.departmentDÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.description.abstractLaser welding method is widely used in the welding of different materials. Deep penetration, low heat input, narrow heat affect zone, low stress-strain, and distortion are important features of this welding method as compared to other joint methods. Today, it is possible to see the applications of laser welding in the repair of precious metals, moulds, and machine parts. The laser welding method is preferred in the manufacture of many parts of precious metals. Titanium and particularly Grade 2 alloys are used in a wide range of applications, from medical applications to the aerospace industry applications. Since titanium is made of precious metals, it is of great use in manufacturing without much scrap. In the joints made by welding, it is estimated that the amount of scrap loss will decrease as a result of the potential to predict the distortion that the material will undergo and to provide more controlled planning of the current production. In this study, the weldability of 0.6 mm sheet materials with laser butt-welding was investigated. The effects of pulsed micro laser welding parameters on the microstructure, mechanical properties, and surface morphology of the fractures were investigated. As a result of the microstructure examination, it was found that cross-section narrowing was seen without filling welding. Fracture of the welded joints occurred in the base metal, showing an ultimate tensile strength of approximately 248 MPa with an elongation of 26.7 %.en_US
dc.identifier.doi10.5755/j02.ms.28372
dc.identifier.issn1392-1320
dc.identifier.issn2029-7289
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-85131008128en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.urihttps://doi.org/10.5755/j02.ms.28372
dc.identifier.urihttps://hdl.handle.net/20.500.12684/12112
dc.identifier.volume28en_US
dc.identifier.wosWOS:000800342100011en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorApay, Serkan
dc.language.isoenen_US
dc.publisherKaunas Univ Techen_US
dc.relation.ispartofMaterials Science-Medziagotyraen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.snmz$2023V1Guncelleme$en_US
dc.subjectGrade 2 Titanium; Micro Laser Welding; Nd:Yag; Welding Parametersen_US
dc.subjectMechanical-Properties; Laser; Behavior; Alloy; Parameters; Morphologyen_US
dc.titleWeldability of Grade 2 Titanium Sheets with Pulsed Nd:YAG Microlaser Welding Filler and Without Filleren_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
12112.pdf
Boyut:
1.03 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu