Investigation of certain engineering characteristics of asphalt concrete exposed to freeze-thaw cycles
Yükleniyor...
Dosyalar
Tarih
2013
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Elsevier Science Bv
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In this study the effects of freeze and thaw cycles on asphalt concrete materials are investigated for binder and wearing surface coats, separately, and for different freeze and thaw cycles. Asphalt concrete (AC) was produced in a laboratory environment, and tests were conducted. Different specimens were prepared with different binders and wearing course based on the calculated pre-optimum bitumen amount, and the optimum bitumen amount was experimentally determined for each layer. According to the value determined for amount of bitumen, 15 AC specimens were prepared for each layer, for a total of 30 specimens. The prepared specimens were exposed to freeze and thaw cycles for 6, 12, 18, and 24 days. Before and after each cycle, the voids ratios filled with asphalt (V-f), void ratio (V-h), and the voids ratios inside mineral aggregate (V-MA) parameters; ultrasonic velocity; and Marshall Stability (MS) values were experimentally determined for each specimen. The results obtained for reference specimens were compared against the values experimentally obtained from the specimens that were exposed to the freeze-thaw effect for 6, 12, 18, and 24 days. (C) 2012 Elsevier B.V. All rights reserved.
Açıklama
WOS: 000313774100013
Anahtar Kelimeler
Freeze-thaw, Asphalt concrete, Marshall Stability, Ultrasonic velocity
Kaynak
Cold Regions Science And Technology
WoS Q Değeri
Q1
Scopus Q Değeri
Q1
Cilt
85
