Taguchi optimization of fused deposition modeling process parameters on mechanical characteristics of PLA plus filament material

Basit Öğe Kaydı
dc.contributor.authorKam, Menderes
dc.contributor.authorİpekçi, Ahmet
dc.contributor.authorŞengül, O.
dc.date.accessioned2023-07-26T11:57:32Z
dc.date.available2023-07-26T11:57:32Z
dc.date.issued2022
dc.departmentDÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.departmentDÜ, Cumayeri Meslek Yüksekokulu, Makine ve Metal Teknolojileri Bölümüen_US
dc.description.abstractThis study attempts to investigate the effect of Fused Deposition Modeling (FDM) process parameters on mechanical characteristics with Taguchi optimization method. Three different FDM process parameters including filling structures (rectilinear, triangular, and full honeycomb), occupancy rates (10, 30, and 50%), and table orientation (0, 60, and -45 degrees) were specified as variable parameters for experiments. Other parameters kept fixed for each tensile and izod impact test samples were printed in line with the ISO 527-Type IV and ISO 180-Type I standards. The results found tensile strength and izod impact values to be directly proportional to the occupancy rate. The difference between the estimation model and the results of experiments did not exceed the maximum value of 1.8%. Thus, by using the equations derived from this optimization, printing parameters can be determined for the desired tensile strength and izod impact values. By improving the material properties using modified PLA+ filament material as observed in the results, it is possible to provide support for researchers, design engineers, and manufacturer to optimize raw-material usage and margin. (C) 2022 Sharif University of Technology. All rights reserved.en_US
dc.identifier.doi10.24200/sci.2021.57012.5020
dc.identifier.endpage89en_US
dc.identifier.issn1026-3098
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-85121542469en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage79en_US
dc.identifier.urihttps://doi.org/10.24200/sci.2021.57012.5020
dc.identifier.urihttps://hdl.handle.net/20.500.12684/13216
dc.identifier.volume29en_US
dc.identifier.wosWOS:000765160500007en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorKam, Menderes
dc.institutionauthorİpekçi, Ahmet
dc.institutionauthorŞengül, O.
dc.language.isoenen_US
dc.publisherSharif Univ Technologyen_US
dc.relation.ispartofScientia Iranicaen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.snmz$2023V1Guncelleme$en_US
dc.subjectFdm; Pla; Tensile Strength; Taguchi; Optimizationen_US
dc.subjectQualityen_US
dc.titleTaguchi optimization of fused deposition modeling process parameters on mechanical characteristics of PLA plus filament materialen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
13216.pdf
Boyut:
2.08 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu